Question about 1997 GMC Sierra

1 Answer

My 97 GMC 2500 4x4 transmission went got a 4l80e from 1995 both 5.7 liter will it work

Ok things I noticed not sure if it will prevent me from using the 95 transmissions in my 97. Cooler lines on my 97 transmission the lower line is in rear of the transmission and on the 95 they are one above the other near bell housing is this ok ? And secondly on my 97 there is one less sensor (interchangeable 1 small bolt) than there is on the 95 so apparently 97 version it was eliminated with plug? So with this being said will it work?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • GMC Master
  • 75,235 Answers

Yes it will bolt up, but the electronic control will be different.

Posted on Jul 01, 2017

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

IS A 1995 CHEVY 2500 4L80E AND 1995 GMC 2500 4L60E THE SAME


it can be done but alot of added stress it would be better to find a k2500 with complete 4l80e with transfer case and all the goodies to go with you need the transmission computer.good luck,mike

Jan 13, 2015 | GMC Cars & Trucks

1 Answer

1995 GMC Sierra K2500 transmission I purchased this truck from a young man that had replaced the original trans. The current, and bad, trans appears to be a 4L80E which is what the truck came with. I...


not sure why so much is different

4L80E is a bread and butter transmission
went into a lot of GM vehicles for many years

mounts for the shift puzzled me
until I read transfer case ..whats your truck got

if you know what wire does what you can make the connections work to the truck

is this information any help

GM 4L80E Automatic Transmission

e4f5b7ed-d3de-4b6f-b918-4705efebd7ca.jpg

Apr 12, 2017 | Cars & Trucks

1 Answer

1995 gmc 2500 4l80e transmission will it work in my 1997 gmc 2500


not 100 percent but in 95 it is 700r4 and went to the 4l80 in 97 for obdII its the same just more electronic unfortunetly i dont think it will work in ur application

Oct 26, 2012 | 1997 GMC Sierra K2500

1 Answer

Will a 4L80E out of a 94, fourwheel drive, chevy diesel, work with a 95 chevy 3500 gas, that had a 4L80E in it? are the selector shafts the only thing that is different? (other than torque conv.) and if...


I'm not so sure that the bell housings are the same. I know that the older ones were different. I would recommend calling A GMC dealer and ask someone in there service department your questions and a good dealer should gladly answer your questions.

Apr 25, 2011 | 1995 GMC Sierra

1 Answer

Will a 1995 3/4 ton 4l80e transmission fit in a 1998 3/4 ton?


Yes, if you have the same engine, and the 98 had a 4L80E in it from the factory.

Feb 28, 2010 | GMC Sierra 2500 Cars & Trucks

1 Answer

Have 1995 gmc with a 4L80E TRANNY IN MY 4X4 wont


could be the valve body has stuck valve or detent cable ismout of adjustment

Feb 05, 2010 | 1995 GMC Sierra C1500

1 Answer

4l80e transmission interchange


700 r4 same tailshaft as 4l80 e . Also you can use any turbo hydramatic if you modify driveshaft

Jan 06, 2010 | 1995 Chevrolet Silverado 2500

3 Answers

Will a 1994 chevy 4l80e 4wd swap into a 1995 GMC


Yes they will swap out nicely, the years where they made the change is in 1997 and the only difference is the transmission end housing has a different bolt pattern but has the same internal parts. You may also want to swap out the servo's with a corvette servo. The cost is around $45.00 and can be done without dropping the transmission pan, this will make your transmission shift firmer and will have less clutch slip[ between gear shifts. Good luck and hope this information helps. 

Aug 19, 2009 | 1995 GMC Sierra

2 Answers

Can i use a 96 4L80E transmission in a 2000 Chevy Express Van


that trans is a little to lite duty for a diesel, u can use it but u will need to install the computer and the correct wiring harness.

Mar 01, 2009 | 1995 Chevrolet C/K 2500

1 Answer

Transmission Identification


If it's a 1500 then yes the 4l60E tranny is for you. If it's a 2500-3500 you'll need a 4l80E. The 80's are only used in trucks with a gvw or 7200 and greater.

Nov 07, 2008 | 1994 GMC Sierra

Not finding what you are looking for?
1997 GMC Sierra Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...