Question about 2001 Mercury Cougar
NEED FIREING ODER AND ORDER ON COIL PACK.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Standing at the licenst plate. Remove the plastic shroud on top of the engine (closest to you) and unbolt the metal box directly below it you can gain access to the front three. As for the back, remove the connector and screw at the 7 o'clock position off to the side of the dist cap. You CAN reach the back three with two 6 inch socket extenders and without remvoing any other engine parts. Should take 30 min regardless of experience. I just did mine and I'm not a mechanic (06/27/07). Answer Hey, I'm not sure if the answer involving removal of the valve covers, and appearently everything else in the engine compartment, is misleading on purpose but...... all you need to do on the 4 cylinder Cougar is pull the wires out by their bases and use a long exstension on your socket. I'm not sure what this guy was trying to do but I hope not too many people followed his advice!! The answer from Greg was exactly correct. Answer To remove the spark plugs, remove the covers and you will see how simple it really is. The spark plugs are hiding under the covers. Greg Hasen Not only you will have to lift the covers, but to reach the back three you will have to remove the valve cover. Here's how to: 1. Remove the water pump belt cover (the black cover in the front of the engine compartment that has ?Duratec? on it.) If you have a 1996+ vehicle, you should think about removing it permanently, since it only serves to trap heat and slowly kill the IMRC box electronics. 2. Disconnect the following electrical connectors from the: MAF, IAT, TPS, IAC, and EVR. The EVR connector is black and is located at the very back of the upper plenum, next to the firewall. 3. Disconnect throttle cable from the TB and the cruise control cable, if equipped. For 1995 5-speed vehicles, take care not to lose the metal clip for the throttle cable when you are removing it. Once the cable is removed the clip will slide right off. 4. Disconnect the vacuum lines from the EVR. You may have to wait until the upper intake is unbolted and partially removed for better leverage. 5. Disconnect the vacuum lines from the top of the upper intake. Push down on the black plastic collar with a screwdriver and hold, and then pull the plastic line out of the intake. 6. Remove the air box along with the MAF and accordion tube. 7. Unbolt the throttle cable bracket from the upper intake (three 8mm bolts, one 10mm nut). Set bracket and attached cables aside. 8. Disconnect the air bypass hose at the upper intake. It connects right next to the IAC valve. 9. Disconnect the hose from the PCV valve that goes to the upper intake, underneath the throttle body. This is also a good time to change the PCV valve. 10. Unbolt the EGR valve from the upper intake. 11. Unbolt the upper intake. 12. Carefully remove the upper intake and set it on top of some clean rags or newspaper. It will likely be oozing some oily gunk out the bottom. 13. Cover the openings of the lower intake with clean rags to keep anything from falling into the openings. Anything that falls in will likely end up in the head or the cylinders themselves. Now you are free to remove the back plugs. Hope this helps Jesus
Posted on Oct 01, 2008
On the 2002 Mercury Cougar
For the 2.5L V6 DOHC:
Posted on Mar 24, 2010
Tips for a great answer:
Jun 02, 2016 | 2001 Mazda Tribute
You may have this posted in the wrong product category. Please select another category appropriate to the problem and re-post the problem so the correct expert will see and respond to the question..
Sep 07, 2012 | Cars & Trucks
Jun 18, 2012 | 2001 Ford Windstar
Sep 12, 2011 | GMC Envoy Cars & Trucks
Fig. Engine Ignition, Page 01 (2002, System overview)
Fig. Engine Ignition, Page 02 (2002, Duratec-VE)
Fig. Engine Ignition, Page 03 (2002, ZETEC-VCT)
Feb 22, 2011 | 2002 Mercury Cougar
Apr 25, 2010 | 2001 Volkswagen Golf
Oct 09, 2009 | 1999 Mercury Cougar
May 05, 2009 | 1991 Oldsmobile Cutlass Supreme
Apr 28, 2017 | 2001 Mercury Cougar
164 people viewed this question
Usually answered in minutes!