Question about 2005 Opel Vectra 2.2

1 Answer

When opel vectra car switch of head light and tail lamp is runing continued why ?

Car is ok run no any other problem than,when i stop the car rmoved the key why head lamp and tail lamp is runing continued

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Opel Master
  • 3,278 Answers

Could be the light control switch they do do this when they fail. if you pull it out. the lights should go off. its held in place with 2 clips you need to put a flat blade in the sides of the black square part and wiggle the switch out. replace the hole switch...this box controls the lighting. fogs side lights main beam control and dash lights.

Posted on Dec 14, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a fuse box diagram for a 1985 1.3 Opel Kadett Cub


I found these on a site I'm assuming they're in order from number 1
Layout Diagram Parts: Direction signal lamps, Right tail lamp, license plate lamp, instrument lights, Left tail lamp, Interior lamp, Heater motor, stop lights, Horn, windshield wiper
if the fuse is good and the wires are not broken or disconnected it may be the wiper motor is bad

Feb 18, 2015 | Opel Cars & Trucks

3 Answers

Why the brake light works and tail light don't work Chevrolet avalanche 2003


they are dual filament bulbs so the tail light filament might have blown and not the stop light , replace the bulb to check

Jul 18, 2014 | 2003 Chevrolet Avalanche

1 Answer

No tail lights


no (park -tail-running lights) is dash parking lamps glowing?
check the tail fuse yet?
94 accord
this circuit is huge, park/tail, up to 20 lamps. are all dead>?
front park, side park, tail park and dash lamps all out.
this i the red-blk feed. all comments , USA, as lighting varies by country. (laws)
license plate light dead too????????? that too is park
there is NO RELAY.
the fuse 32 feeds the HL (head light) switch and in PARK posistion
it feeds 12vdc raw power to all 38 lamps. (side corning lamps,etc)
the license plate lamp is key, there are 2 lamps.
and both probably are not out.
so if they are good lamps and both tail lamps are good and fuse
then they must glow, if one lamp shorts as 1156 or the like love to do
then it blows the fuse. as does the trailer jack (option) .

so fuse 32 park/tail blown
or HL park switch bad, if all 20 odd lamps dead. and fuse holds.
that simple, and this cars wiring is very simple and nice.

Feb 26, 2014 | 1994 Honda Accord

2 Answers

Brake light switch


tails lights are the GLOW when the headlights are pulled one cluck or 2, tails are also parking light (one click)
stop lamps HAVE nothing to do with that,
he never said but implies, the brake lamps are dead.
but OP, try posting what is dead, and not mix TL with BL.

my tails lamps are out , whith head lamps on.
or
when i brake , both stop lamps are out.
this will help.

Oct 08, 2013 | 1995 Jeep Wrangler

1 Answer

I have a 98 chevy malibu. the tail lights, running lights and instrument lights do not work but head lights do


The good news is that all of these problems stem from the same source: the 15A PARK LPS fuse in the underhood wiring harness junction block. When you set the turn/headlamp/wiper switch to PARK, the park lamp relay in the junction block closes and power is applied to the front marker lamps and the park filament of the front park/turn lamps as well as the tail filaments of the rear tail/stop lamps.

As for the instrument lights, that same PARK LPS fuse applies power to the same turn/headlamp/wiper switch that, when set to PARK or HEAD applies power to the variable panel dimmer switch which lets you set the illumination level. Switch output is applied to the lamp dimmer module and module output passes through the 10A INST LAMPS fuse in the right I/P wiring harness junction block to the instrument lamps

Oct 13, 2012 | 1998 Chevrolet Malibu

3 Answers

Opel Vectra B model 1997 Gl 5d 1.6 wont fire up


Ok..for starters have you checked to make sure your getting fire to the plugs? Need to pull a plug wire off and check to make sure. If your getting fire then your problem lies in the fuel delivery system...if not then it would be in the ignition system...have you checked ALL of your fuses? Make sure that your fuel filter isn't plugged, and on the fuel rail you'll find a small port with schrader valve (similar to that on the tire)..you can turn the key to the run position and then push in on valve to see if your getting fuel to the rail..once you narrow it down to fuel delivery or ignition problems we can further narrow it down.

Mar 02, 2012 | Opel Vectra Cars & Trucks

4 Answers

Tail lights do not work. Bulbs are good. Both fuses are good(separate cicuits). What else could it be? Is there a relay involved? Could the switch be defective? thanks! Mike


All the exterior lights run threw the turn signal switch. Except the high mount brake light. If you are talking about brake lights replace the TS switch. Parking lights are a little different. If you have no parking lights front and back, TS switch. If you have front and no back, ground problem. Grounds for the back are usually on the drivers side mounted to the frame.

Aug 01, 2009 | Hyundai Motor 2005 XG350

1 Answer

'86 Mustang Head Light Switch Pin Out Connectors?


I can give you 94 mustang. Don't have 86 but maybe similar

7fc8945.gif Pin Number Circuit Circuit Function B1 38 (BK/O) Power Supply to Battery B2 195 (T/W) Tail Lamp Switch Feed I 19 (LB/R) Instrument Panel Lamp Feed IGN — Not Used R 14 (BR) Headlamp Switch to Tail Lamp and Side Marker Lamps H 15 (R/Y) Headlamp Dimmer Switch Feed DN — Not Used D1 54 (LG/Y) Interior Lamp Switch Feed D2 706 (GY) Battery Saver Door Switch Feed

Apr 30, 2009 | 1986 Ford Mustang

1 Answer

''96 Silverado no tail lights.


if that doesn't help, you might want to check the bulbs. the damage might have shorted which burned out the bulbs. but you do have one wire that runs to the rear and splits off to the tail lights. the wire should run back to the head light switch via a fuse. the headlights have its own relay. but i hope it is just a fuse.

Dec 10, 2008 | 1996 Chevrolet K1500

Not finding what you are looking for?
2005 Opel Vectra 2.2 Logo

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Opel Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Brad Brown

Level 3 Expert

16195 Answers

george parkes

Level 3 Expert

975 Answers

Are you an Opel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...