Question about 2002 Volkswagen Golf
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: vw golf bonnet release
On mine, a RHD, it is a plastic lever just forward of the door post. It is a crappy piece of plastic about four inches long.Mine has recently broken and will result in a bill for about £60-70 for replacing the lever and the cable (the cable is very tight)
Getting the handle off was a hell of a job until someone spotted that inside the handle, on the lower part as accessed from the outside, is a clip that needs to be pulled out to release the handle. Only then could we reach the cable and that took an enourmopus amount of effirt to release the bonnet.
As the mechanic said, "I didn't expect this sort of rubbish from VW"
Posted on Sep 09, 2008
No problem. The key fob is two pieces. The key part and the remote. Open the key as you would to sue it. Where the key flips open you can see a small recess about where the line of the trunck switch. This is where the key separates. You can pull it off or pry it with a small screwdriver. Once separated with remote part in your hand this also splits in 2. In the same area you split the key off insert the screwdriver in this recess and the fob will open giving you access to the battery. Also can be done by hand. It is a little tight so you will have to force which is normal. No screws just clipped. Make sure the battery is positioned in the right way and that you have 3 volts when you test the battery. 2.7 volts will make the remote not work or act funny.
Posted on Nov 01, 2008
SOURCE: 2003 VW Golf - O2 Sensor?
Honestly it is not very expensive to replace, but it is not extremely important. What it does is measure the oxygen/fuel level coming out of the engine. This tells the computer that the engine is either using the right air/fuel mixture or allows the computer to change the mixture slightly to allow the car to run properly. You could pull the sensor out and clean the terminal as it usually has alot of carbon build up due to its location, but this is normally a temporary fix. I hope this helps you with your problem.
Posted on Jul 23, 2009
Tips for a great answer:
Dec 19, 2015 | Cars & Trucks
Jul 02, 2010 | 2001 Volkswagen Jetta TDI
Feb 18, 2010 | 2001 Volkswagen Golf
Feb 02, 2010 | 2001 Volkswagen Golf
Jan 20, 2010 | 2003 Volkswagen Golf
Jun 06, 2009 | 1998 Volkswagen Golf
Jul 09, 2008 | 2001 Volkswagen Golf
38 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: