Question about 1996 Honda Accord

Open Question

Need to find the timing marks on a 1996 honda accord v6?

Changed the head gasket's out. Iv'e put everything back together. Now trying to time the engine. Can't find my the factory marks. Where are they?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
95zcvtecsi
  • 26 Answers

SOURCE: 1992 honda accord ex timing belt

yes this engine is a interference engine. Make sure you did not bend the valves when it boke.

Posted on Jul 21, 2008

Ad
  • 1 Answer

SOURCE: 95 honda accord V6 tachometer jumping and cutting out.

I had the same problem with my 1995 Honda Accord V6 2.7L a year ago. It was a pain to have Honda diagnose the problem because it was intermittent and every time I took my car in to the dealership they said they couldn't reproduce the problem, but the longer you wait the more frequently your tachometer will fluctuate. I finally stopped by the dealership when the tachometer was jumping and they were able to diagnose the problem. In my case there was a faulty resistor in the ignition coil, but the entire ignition coil needs to be replaced. I don't know anything about cars but I know this fixed my problem. I went directly though Honda's service center so I know they charged me more than an independent repair shop but I'm looking at my invoice now and I paid $150 for the ignition coil and $200 for labor. After Honda diagnosed the problem I searched for "1995 honda accord ignition coil tachometer" and found that other people had the same problem and replacing the ignition coil was the fix. Hope this helps.

Posted on Oct 06, 2008

c17hydro
  • 2984 Answers

SOURCE: 1996 Honda Accord Timing Belt Installation. I need help.

You didn't post the size of motor so please use the one that is for you:

2.2L (F22A1) ENGINES
Install the timing belt, around the pulleys, in the sequence shown


26f5cb1.gif

a9d5be6.gif

Posted on Jun 30, 2009

  • 2841 Answers

SOURCE: Timing belt on Accord 2004 v6 models

2003 and up Honda Accord with 4 cylinder engines do indeed have a chain and the V6 has a belt which must be replaced at 110,000 miles. Why? Ask Honda, they designed the engines.

Posted on Aug 02, 2009

Testimonial: "Thanks for your clarification. Most helpful"

ZJLimited
  • 17970 Answers

SOURCE: need diagram showing timing adjustment for a 1992

Check the position of the timing marks. The timing pointer mustbe perfectly aligned with the TDC (white mark) on the flywheel orflex-plate; the camshaft pulley must be aligned so that the word UP isat the top of the pulley and the marks on the edge of the pulley arealigned with the surfaces of the head. Additionally, the face of thefront timing balancer pulley has a mark which must be aligned with thenotch on the oil pump body. This pulley is the one to the left crankwhen viewed from the pulley end.

Also, in here, 1994-Honda-Accord-Coupe-Section-01-Engine (page 47 and next / TDC marks) you can find referenece information about Accord Engine.

If you need more details, visit autozone.com (free register) and select your model vehicle.

I hope help you (remember rated this help) Good luck.

Posted on Sep 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

88 Honda prelude SI wont start?


U need to re-timed the engine. Check all four marks going across the two cam pully is lined up with the engine head surface.
Then check the crank pully alignment mark the single notche align to the mark on the timing cover

Apr 05, 2015 | 1988 Honda Prelude

1 Answer

Timing marks on a double overhead cam on 1996 Honda Accord 2.7 V6


sure do, or BOOM ,kiss off engine..
the FSM covers this. why build engine on rumor?
the alldata.com
and so does Mitchell.
discounted DIY too boot, pay , read it, it's complex.
http://www.scantool.net/software/alldata-diy-1-month-subscription.html

choice 4 is free books. (more work that, sorting through it. etc..)
posted 50 times or more..... here...

http://hondatech.info/downloads/Auto/Manuals/Accord/

2.7 is belt drive. some online sites, skip the 2.7 (warning) jokers.

Nov 25, 2013 | 1998 Honda Accord

1 Answer

Location of timing marks on a 1996 Honda Accord V6


Compare the manuals at the auto store to see which one shows it best for you.

Nov 22, 2013 | 1996 Honda Accord

1 Answer

Smoking and hesitation when i start it up


check the coolant level. if it is low or empty you have a blown head gasket. On acceleration the leak in the head gasket is causing the rough running and stalling

Oct 12, 2013 | 1996 Honda Accord

2 Answers

I just replaced the starter on my daughters 1996 Honda Accord it started overheating and shutting off she put antifreeze in the radiator but it continued to smoke and shut off again now it won't s


If the smoke is white ,it's water (head or gasket)
Timing belt will shut it off completely.
Can't see any way the starter could have anything to do with it.
However if it has a head gasket problem,hydrostatic lock can
make a good starter look bad(,water will not compress like air)
so if there is water in a cylinder the engine won't turn over.
If a head gasket is bad there will be white smoke out the
tailpipe and bubbles coming out of the radiator (cap off while
cold)

Apr 19, 2013 | 1996 Honda Accord

1 Answer

How to remove timing belt/head for gasket replacement on 1992 ford laser 1.6


Is this an over head cam? Must be if it has a timing belt. OK, Pull everything off that is in the way, take fotos if you have to remember where everything went, air filter, intake, dist? anything, everything. Fan in the way? Timing cover, Expose the belt, highlight the timing marks on the cam and the crank, put the mark on the belt as well, Pull off rocker cover, Look underneath cam for head bolts, If the cam has to come off, Mark it with a white pen or a junk yard marker, Do not let it move from its position, Pull the cam, pull the head bolts, pull the head off. Check it for flat, see if it got hot and warped. If it did, you will need to get it planed. You might as well get it checked out while you got it off. Get a new gasket on there, no adhesive, no silicone, no glue, dry. You are supposed to use new bolts, but we'll let it slide. They cost about $50. Torque it down according to spec and pattern, Put the cam back on, align the marks, put the belt on, It should line up with the mark, or better yet, it has to. Set the tension on the belt, put the covers back on, you could crank the engine over by hand to make sure it is OK, then put it all back together, to make it easy to spin by hand, pull the spark plugs out. Get all the fan, air filter, intake, wires, cables, etc back on there, check the foto, fire it up. Hope this helps.

Oct 05, 2010 | 1992 Mazda 323

1 Answer

Can any body help put cambelt back together


You need to rotate the cam until timing marks on the sprocket are in line with the head, then make sure crank shaft timing mark is lined up. Install the belt. Might have to loosen the timing belt tensioner. Put timing belt tensioner back on, rotate the crank shaft with a wrench first to make sure there's no interference. Next, check compression.

Jan 03, 2009 | 1994 Honda Accord

Not finding what you are looking for?
1996 Honda Accord Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...