Question about 2002 Chevrolet TrailBlazer
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
IF U GO TO THE RIGHT SIDE OF THE ENGINE AND LOOK 4 INCHES BEHIND THE BELT IT WILL BE ON TOP OF THE TIMING COVER.THE WIRES WILL BE RED/WHITE,BLACK,BROWN/WHITE
Posted on May 05, 2009
SOURCE: p0014 engine code
THE CAM SHAFT ACTUATOR IS LOCATED IN THE CYLINDER HEAD ON THE FRONT RIGHT HAND SIDE JUST ABOVE THE POWER STEERING PUMP. AFTER YOU REMOVE THE ACTUATOR CHECK TO SEE IF ANY OF THE SCREENS ARE DAMAGED OR MISSING. IF SO REPLACE THE ACTUATOR. ALSO CHECK THE CRANKSHAFT END PLAY. IT SHOULD BE BETWEEN 0.0044" - 0.0153". if excessive crankshaft end play is causing this concern, it will be obviously out of specification by as much as.050" or more when a pry bar is used to move the crankshaft back and forth. IF THIS IS THE CASE AN ENGINE REPLACEMENT IS RECOMMENDED DUE TO THE AMOUNT OF DEBRIS IN THE ENGINE. IF NO EXCESSIVE CRANKSHAFT MOVEMENT NOTICED REPLACE THE CAM ACTUATOR. IT WILL ALSO BE NECESSARY TO DO AN OIL CHANGE.
Posted on May 23, 2009
Hi : Your CPS (Camshaft position sensor) is located on the Engines Front Cover (Timing Chain Cover) its right below your Cylinder Head ,Get a Good Bright Light to Locate it ,You'll see a Wiring Connector plugged into the Sensor, emove the electrical Plug.
Then you have 1- Screw Holding it in Place -Remove the Retaining Screw and Remove the Sensor.
To replace it with your new Camshaft Sensor Put the Camshaft Sensor in where you took out your Old one,Replace the Retaining Screw Tighten up Good And Snug,Put the Wiring connector back on the Sensor and Your Done. This will get your job done,Let me know Please how My Solution/instructions have Helped you. Thanks From d_hubbs
Posted on Jun 09, 2010
Tips for a great answer:
Jan 11, 2016 | 2004 GMC Canyon
Feb 09, 2013 | 2006 Chevrolet TrailBlazer LS
Crankshaft Position Sensor Operation?
Replace Camshaft position sensor and Crankshaft Position Sensor? http://technoanswers.blogspot.in/2012/06/2005-dodge-durango-replace-camshaft.html
GMC Crankshaft Position (CKP) Sensor Replacing? http://schematicsdiagram.blogspot.com/2011/12/gmc-crankshaft-position-ckp-sensor.html
These details will help.
Nov 25, 2012 | 2000 Cadillac Escalade
Nov 23, 2011 | 2005 Chevrolet Trailblazer Ext
Mar 24, 2011 | 2004 Chevrolet TrailBlazer
Sep 12, 2010 | 2005 Chevrolet TrailBlazer
Jun 08, 2010 | 2002 Chevrolet TrailBlazer
Jan 15, 2010 | 2005 Chevrolet TrailBlazer
Mar 19, 2009 | 2002 Chevrolet TrailBlazer
91 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: