Question about 2002 Nissan Altima
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Misses that occur only under load are typically spark related. Engines typically need about 8000 to 12000 volts of spark energy to idle, but under load and acceleration, they can require as many as 30,000 volts. Weak coils frquently can still make 10-15000 volts, enough for light cruising and idling, but insufficient for load. Further, a defective boot or carbon tracked sprak plug may fire normally at idle and cruise, but "arc" down a black carbon track in the plug porcelin under load. You should take the car to someone who has the equipment to propely examine misfires. Or if you really feel the need to do it yourself, you could try pulling all spark plugs one at a time( assuming you dont have a scantool or trouble code data to point you to a specific cylinder) and visually inspecting them. They should ALL be clean and dry and white all around. If you see any black lines or marks in the porcelin of any spark plug, replace both that plug, and the wire or coil boot attatched to it. If you dont see any dirty or wet or oil soaked plugs, you likely have a weak coil that will require scan, scope, or load testing to isolate. Most professional shops have the equipment to do this.
Posted on Sep 15, 2009
The name of the sensor is call Vehicle Speed Sensor (VSS).
It's on the body of the transmission and connected via wire INTO the firewall.
Please rate my answer if it's helpful to you.
Posted on Dec 14, 2009
you need to look at the radios to see if the part number matches. its a small series of numbers and letters somewhere on the front. it will be something like "da4cp" or other nonsence numbers. look for that and that willl tell you if it will go in or not.
Posted on Feb 21, 2010
take interior cover behind tail light inside trunk off.the bulb the bulb twist locks in hole(twist counter clockwise to remove)repeat procedure to replace.
Posted on Mar 23, 2010
Tips for a great answer:
Dec 03, 2015 | Nissan Cars & Trucks
Sep 19, 2014 | 2006 Nissan Altima
Aug 25, 2013 | 2006 Nissan Altima
Aug 21, 2012 | 2006 Nissan Altima 3.5
Feb 26, 2011 | 2006 Nissan Altima
Mar 23, 2010 | 2006 Nissan Altima
Jun 25, 2009 | 2006 Nissan Altima
Jan 03, 2009 | 2006 Nissan Altima
Sep 14, 2017 | 2002 Nissan Altima
Apr 03, 2017 | 2002 Nissan Altima
184 people viewed this question
Usually answered in minutes!