Question about Chevrolet Silverado 1500
Power mirror fuse blows constantly after replacing it
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
very easy take the mirror inside cap off if you can not get to the 3 bolts then you will have to take trim panel off to take trim panel off look for plastic caps take them out and unscrew them then pop out the bottom of the door and pop the sides out then lift up and out should be loose enough for the bolts now/ 10mm bolts 3 Please rate my response thank you very much
Posted on Feb 02, 2009
I don't know what your question is but if it is what fuse is for your power mirrors it is fuse #4 in your central junction box which is in the cab of your truck. Good luck.
Posted on May 06, 2009
Silverado power mirror/s do not work.
Assuming you have power to the switch, the switch contacts are bad. Each contact may go bad at different times.Pry the switch panel from the door, disconnect the plug to the switch, a small screwdriver may help. Remove the switch by pushing the retaining lugs in & pry out.
Now take it to a clean workbench along with 2 small thin screwdrivers.
Insert 1 driver in beside one of the keeper lugs & pry slightly, continue to the next until the switch comes apart. No springs will fly out.
You will see a control knob & housing, A blue vinyl like cover, Lift the blue cover off, now you will see the contacts on the board.
Take a cotton swab with carb cleaner & scrub the contacts, even a piece of 320 sandpaper.
Next, on the under side of the blue vinyl like cover there brass like contacts fixed to the cover, they need cleaning.
I cut a few 1/8'''x1/8'' # 320 sandpaper,A 1/8'' dowel & hot glued a piece of s-paper on the 1/8'' x6'' dowel.
I then carefully slowly spun the s-paper on the contact. then to the next contact with a new piece of sandpaper & so on.
Lastly cleaning with carb cleaner & blowing dry.
Reassemble, hookup & test Walla! both mirrors work. Time, 20 to 30 min.
Posted on Oct 25, 2009
Tips for a great answer:
Aug 18, 2014 | 2009 Chevrolet Silverado 1500
Jan 30, 2014 | 2003 Chevrolet Silverado 1500
Nov 04, 2013 | Chevrolet Malibu Cars & Trucks
May 28, 2012 | 2003 Chevrolet Silverado 1500
Jul 02, 2011 | 2009 Chevrolet Silverado 2500HD
Jan 13, 2010 | 1999 Chevrolet Silverado 1500
Jan 08, 2010 | 2009 Chevrolet Silverado 1500
Mar 03, 2009 | 1999 Chevrolet Silverado 1500
Feb 12, 2009 | 1999 Chevrolet Silverado 1500
Dec 10, 2008 | 1999 Chevrolet Silverado 1500
Sep 24, 2017 | Chevrolet Cars & Trucks
87 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: