Question about 1987 GMC VanDura

2 Answers

Don't know where to put brake fluid

1987 GMC Vandura where does the brake fluid go?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

My 1987 GMC 2500 Vandura has the brake fluid reservoirs directly above the master cylinder. They are both under the hood on the drivers side. They have rectangular black metal snaping caps. It takes DOT 3 fluid.

Posted on Jan 24, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 176 Answers

First..make sure you have the right fluid..DOT number...the reseerve is on the drivers side under the hood near the back of the motor cavity.....should be made of a very translucent white platic....make absolutely sure nothing falls into the resevoir when you're adding fluid

Posted on Jan 03, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Bleeding brakes

If you did not have any brake fluid leak out when you changed the brake shoes, then there is no need to bleed the brakes. The bleed ports are on the wheel cylinder next to where the brake line attaches to the cylinder.

Jan 12, 2014 | GMC V2500 Cars & Trucks

1 Answer

Need a wireing diagram

Ido not see a solution posted...but will offer thar your input voltage to the coil is low when cranking the engine...but when the key is restored to the run position, voltage is almost enough to fire a spark plug. Put a dc voltmeter on the 12 volt input terminal of the coil and confirm. If input voltage is ok then replace coil.

Nov 19, 2011 | 1987 GMC VanDura

1 Answer

Van got hit on right side brakes were new after being hit van would not stop countinued to roll down hill until i turned van now van has no brake system now

Sounds like a broken brake line. Look for brake fluid around the area of the impact or check the master cylinder for fluid to confirm this.

Aug 24, 2011 | 1987 GMC VanDura

1 Answer

Serpentine belt diagrams 1990 gmc vandura

My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at!
Again my apologies...

Jan 23, 2010 | 1987 GMC VanDura

1 Answer

1987 GMC Vandura van, speedometer doesn't work, not the cable.

do you have a speedometer cable? if your turning your cable by hand after removing from transmission and it works then the problem should be in the little gear thats in the transmission,

Jan 17, 2010 | 1987 GMC VanDura

1 Answer

How much of a repair

this service can range from 75 -500 dollars depending on what is wrong

Jan 23, 2009 | 1987 GMC VanDura

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

71525 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides