Question about 1999 Ford Ranger SuperCab

1 Answer

1999 ford ranger 4 wheel drive 5 speed won't start

Wasn't having any problems with my truck until it was towed. Now I can't get it to start. Lights come on but doesn't even crank. Is there something with the antitheft ignition that I need to do to get the truck to start??? I know the key has an antitheft chip in it but wouldn't think this would cause this kind of problem since I'm using the original key.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had a 93 ranger, same thing happend to me. Ended up it was the little switch on the cluch pedal. when they pushed the clutch in their foot kicked it off. Its just a clip on spring on the arm of the pedal.

Posted on Jan 06, 2009

3 Suggested Answers

AutoDocP
  • 56 Answers

SOURCE: Lost keys to ford ranger and need to bypass the

Hi,

I am not allowed to provide instructions to bypass an antitheft system, I am sorry.

But I can tell you that it ist not simple to be done,I think it´s even impossible to override the system of your car. The reason is that the immobilizer is included in the engine control module, so there is no way to bypass the system.

The easiest -and cheapest- way is to order a new key or tow the car to the next Ford Branch to program the existing key.

Posted on Jun 25, 2010

Mr BrokRench
  • 1623 Answers

SOURCE: Went to start my car,

The most commonly diagnosed component is the shifter and/or shifter solenoid on your Impala.
GM issued a bulletin on this problem. Contact your dealer, they are aware of the problem and you could be covered under warranty. Below is a copy of the bulletin.

#08-07-30-007A: EI08045 - Key Cannot be Removed from Ignition with Gear Selector in Park, Shifter Cannot be Moved From Park Position (Engineering Information) - (Apr 8, 2008)
999999995.gif
Subject: EI08045 -- Key Cannot Be Removed from Ignition with Gear Selector in Park, Shifter Cannot Be Moved From Park Position (Engineering Information)

Models: 2007-2008 Chevrolet Impala
Good luck, i hope this helps.

Posted on Jun 28, 2011

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can you tow a 94 2 wheel drive 5 speed ford ranger with a tow bar behind your motor home


you can tow it with the proper set up correct weight class tow bar/hitch and IF your within your motor homes tow capacity

Sep 13, 2016 | Ford Cars & Trucks

2 Answers

Ford Ranger won't move?


you might need a new whole transmission or new brakes or brake fluid.

May 03, 2016 | 2003 Ford Ranger Regular Cab

1 Answer

4x4 will shift to 4 high but will not go to 4 low


Ford Ranger Questions - 4 wheel drive relay clicking under ...

www.cargurus.com > Questions > Ford > Ranger
CarGurusJun 5, 2013 - 4 wheel drive relay clicking under dash - i put my truch in 4x4 the other day and ... and watch it move (or not move) while selecting 4x4 high, low and so forth.... MY 1999 Ford Ranger 4x4 will not go in 4 wheel drive 5 answers.

Sep 14, 2015 | 1999 Ford Ranger SuperCab

4 Answers

Can I tow my 1991 ranger 2wd 5speed manual trans with all 4 wheels on the ground?


Yes it is OK. Generally speaking it is only automatics that have a problem when towed.

Mar 29, 2015 | Ford Ranger Cars & Trucks

1 Answer

#26 fuse keeps blowing


You had vehicle with no problems until you
paid a butcher to install the radio,so you know
how the problems got there

Now you go back to the radio folks or get it out of the
system & return the vehicle to as built working condition
yourself

Apr 26, 2014 | 1999 Ford Ranger SuperCab

1 Answer

Need to know what 5 speed transmissions will interchange with a 92 ranger with a 3.0


You didn't mention if it was 2 or 4 wheel drive so I went with a 2 wheel drive. According to hollander the 5 speed transmaaion fits a ranger (2WD) 1991 - 1994 and a Mazda B3000 1994 only. Hope this helps.....

Oct 29, 2012 | 1992 Ford Ranger

1 Answer

1999 ford ranger 4x4 no 4 wheel drive


solenoid on back of transfer case is defective or no power to it /12 volts

Dec 17, 2008 | 1999 Ford Ranger SuperCab

2 Answers

1991 ford ranger not getting any spark


probably the coil , but have your alternator checked first

Oct 07, 2008 | 1991 Ford Ranger Supercab

2 Answers

I have a 2004 5-speed Ford Ranger. It is stuck in 4x4 high and the lights on the dash do not register anything when the knob is turned. any suggestions


I would try tapping on the shift motor mounted on the trnasfer case as they have been known to stick at times. I would also make sure you do have the vehicle in neutral and your foot on the brake pedal before trying to unlock.

Sep 25, 2008 | 1999 Ford F150 Regular Cab

Not finding what you are looking for?
1999 Ford Ranger SuperCab Logo

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...