Question about 2002 Chevrolet Venture Passanger
Service ligth is flashing, engine oil was changed
Your vehicle should have come with a reset key. You need to insert that into the keyhole to reset the maintenance indicator.
if you need a auto tool you can click here: great tools
Posted on Oct 27, 2012
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: change oil light
Are 2 step to RESET the engine oil on your chevy 02.
The first one ..
Turn the key to RUN position. Engine OFF.
Them FULLY PRESS and REALESE the ACCELERATOR PEDAL
For 3 times between 5 seconds and wait until the Change OIL start blinking and goes OFF.
Now the System is reset.
The second step is.
2-- This procedure need the RADIO, if you have an aftermarket
Radio you don't be able to do.
Turn the ignition switch to ON position,
turn OFF the RADIO,
Press and hold the Tune disp, button for 5 seconds or until
Settings is displayed,
Press the seek ptype or seek pscan up and dow to scroll the main menu,
Scroll until the OIL LIFE appear on display
Press the 1prev or 2next to scroll the sub menu, RESET will be displayed , Press the TUNE disp buttom to reset,
A chime will be heard to verify the new settings and done
Will be displayed for one second.
Press the TUNE DISP to exit from the program,
A chime will be heard to verify the exit.
I hope this help on your question.
Thank you for use fixya...
Posted on Sep 24, 2008
You could have a restriction in the egr ports. remove the valve. Plug the holes, start engine. 1 hole will be blowing out exhaust, the other will have large vacuum.
Posted on Mar 28, 2009
I use 5W30 Mobile 1 synthetic-5 quarts.
The air filter change is a real pain.
Remove driver side tire.
Remove driver side wheel well.
You will see the filter canister in the front of the wheel well.
I had a mechanic do it for me and it took him 1.5 hours. If you plan to do it yourself, be sure you have plenty of time and alot of patience.
Posted on Apr 05, 2009
. With the ignition key in RUN but the engine off, repeatedly push the trip/reset button until OIL is displayed on the Driver Information Center. 2. When OIL is displayed, push and hold the trip/reset button for five seconds. The number will disappear and be replaced by 100 (indicating 100% oil life remaining). 3. Turn the key to OFF. If the change engine oil message comes back on, the engine oil life monitor has not reset. Repeat the procedure
Posted on Jul 11, 2009
Tips for a great answer:
May 23, 2012 | 2002 Oldsmobile Silhouette
Mar 08, 2011 | 2003 Chevrolet Malibu
May 11, 2010 | 2002 Jeep Grand Cherokee
Apr 19, 2010 | 2003 Chevrolet Monte Carlo
Sep 26, 2009 | 2006 Chevrolet Equinox
Jul 11, 2009 | 2000 Chevrolet Venture
May 12, 2009 | 2005 Chevrolet Equinox
Mar 26, 2009 | 2003 BMW 5 Series
Mar 22, 2009 | 2005 Chevrolet Venture
Aug 09, 2008 | 2002 BMW 5 Series
318 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: