Question about 2003 Chrysler Town & Country

1 Answer

My dashboard lights don't work

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 75,797 Answers

Do you have the dash light dimmer control turned off by chance?

Posted on Oct 27, 2012

  • 2 more comments 
  • rblues66
    rblues66 Oct 30, 2012

    We have tried everything including going through the owner's manual. Also, there is no marked fuse in the fuse box located under the hood.

  • yadayada
    yadayada Oct 30, 2012

    The dash lights are fused through the headlights.marker lights. you likely just have a defective dash light dimmer control rheostat.

  • rblues66
    rblues66 Oct 31, 2012

    Thank you! Will try that.

  • davidpuglisi
    davidpuglisi Dec 18, 2012

    What if the dash lights are out, but the odometer is still lit and can be dimmed by the rheostat,and the cabin lights work normally. All that is not working is the lighhts on the entire cluster and the temp control panal in the center cluster??

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My tail lights and dashboard lights don't work?


First thing to do is to check out the fuse for them. If you have your owner guide it will tell you we're and which one it is. If it the fuse and you replace it and it does it again you might have a short in the wiring

Nov 05, 2012 | 1995 Isuzu Rodeo

2 Answers

Dashboard & Highbeams Don't Work


DRIVERS SIDE BULB IS PROBABLY BAD, SWITCH THE LEFT TO THE RIGHT AND SEE IF YOU HAVE THE SAME PROBLEM. IF YOU DO... IT A WIRING PROBLEM. GOOD LUCK

Nov 03, 2012 | Chevrolet Blazer Cars & Trucks

1 Answer

My dashboard light isn't working but my turn signal light, emergency break light and all other warning lights work, just not the backlight so I can see the speed i am travelling in the dark.


Did you try turning the wheel/knob next to the head light switch? It's the dimmer for your interior lights. Sometimes that happens and some ppl don't know about it. Not sure how familiar you are with it so thought I'd throw that out there.

Oct 28, 2012 | 2002 Chevrolet Malibu

1 Answer

I'm having a problem with my 1992 Nissan


I would suspect the multi function switch is defective, have a shop confirm my guess.

Oct 09, 2012 | Cars & Trucks

1 Answer

Part of the lights on the dashboard lights on one side and the other side don't light on


Check the tail lights if they are noe working check the fuse marked 'tail" in the fuse panel at the left lower dash replace this fuse, it also powers the dash lights.

Sep 14, 2012 | 2003 Toyota ECHO

1 Answer

My ABS/Brake light in dashboard is on .


I didn't have that issue,but I had a 1992 dakota with
rear abs only & I just unplugged the module under the dash

I'm all for diagnosing everything & having it factory stock & working

But you don't need abs on a 4x4 that old & the rear hydraulic
abs unit ,gets so rusty that it is sad.

If you ever replace rusted brake tubing, remove it

They don't check that in inspection

Jun 06, 2012 | 1999 Dodge Ram

1 Answer

How can I figure out why fuse 15A keeps blowing? My dashboard lights don't work nor do the back lights. My breaks and signals work but at night when I turn the car on the regular lights in the back...


There is a shorted wire somewhere in that circuit. Check to see if any wires are pinched under a bracket or brace where he was working. I have seen it where it was a light bulb the was bad. Need someone familiar with a volt/ohm meter to help trace problem. Good Luck. You did not state where he had been working.

Apr 17, 2012 | 1996 Honda Accord

1 Answer

Dashboard lights not working and brake light also not working but all the other lights work


Check the fuse, the fuse must be in the main fuse box. The position and function of the fuses is normally marked on the inside of the fuse box cover and also in the owner's handbook. If you don't come right with these, work your way through the fuses looking for a blown one. To ease your search for the required, fuse it should be around 20 amps.

Apr 24, 2011 | 1998 Ford Taurus

Not finding what you are looking for?
2003 Chrysler Town & Country Logo

287 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...