Question about 2006 Suzuki Forenza
What should the belt be set on
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
it is located on the hub of the car were the front wheel holds on to the car its a lttle black round looking sensor bolted on.
Posted on Apr 02, 2009
SOURCE: 2006 suzuki forenza
The gear-shifter solenoid or brakelight switch has failed.
To check the brakelight switch, start the car and step on the brake. If the brakelights don't come on, the switch is faulty. You'll find the switch under the dashboard above the brake pedal.
If the brakelights came on, your shifter solenoid is probably bad. In this case, here's a quick-and-dirty fix to get you moving...
Look for a small plastic cover next to the gear shift. Pop this off with a fingernail or small flat screwdriver. There will be a hole beneath the cover. Push a small screwdwiver down that hole untill you feel some resistance. You should now be able to shift out of park.
Be warned...this trick allows a shift even without touching the brake. So get the solenoid fixed as soon as you can.
Good luck !
Posted on Jun 17, 2009
Right on the transmission, to the right side of the engine bay as you are looking down on it. It is a black plastic part that is bolted on the transmission with two 10mm bolts, and connected to the transmission with rod and clip. It is partially obstructed by the radiator hose, but otherwise really easy to get to.
Posted on Jan 28, 2010
The diagram should be located under the hood by latch that holds your hood down on either the hood or the support for the radiator.
But hope these help. Also check out Suzuki Forums for more info
Posted on Feb 07, 2010
hi im not sure on this particular model but there a few easy ways to check.... take the spark plugs out, remove the broken belt, shine a light down the holes and look for dammdge, if you cant see anything you can turn the crank but it is a tricky job because you can ruin the engine so if your unsure get a mechanic to do it.. or your other alternative is to remove the head and have a look but you will need a new head gasket kit, timing belt and tensioner kit etc .. it is important that you do not turn the engine over when the belt is disconected in any way UNTIL you know for sure that valves wont hit pistons, even bending a valve will not be very noticable but when its all back together you will deffinately notice and will have to pull it all back apart
Posted on Feb 10, 2010
Testimonial: "Really Fast Reply with very good information. THANKS!!"
Tips for a great answer:
Apr 21, 2013 | 2006 Suzuki Forenza
Mar 16, 2013 | 2006 Suzuki Forenza
Dec 31, 2012 | 2006 Suzuki Forenza
Oct 09, 2012 | 2006 Suzuki Forenza
May 01, 2012 | 2006 Suzuki Forenza
Nov 29, 2010 | 2002 Mitsubishi Eclipse
Feb 06, 2010 | 2006 Suzuki Forenza
Nov 07, 2009 | 2006 Suzuki Forenza
14 people viewed this question
Usually answered in minutes!