Question about 2004 Pontiac Grand Prix

1 Answer

How to remove grand prix window switch cover - 2004 Pontiac Grand Prix

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 645 Answers

Remove the two bolts on the bottom portionof the rear seat cushion.Pull the tabs along the bottom portion of the rear seat cushion until it unhooks from the floorboard mount. Pull the cushion out of the back seat area and set it down. Remove the anchor nuts. Push the seatback toward the rear and up to disengage it from the hangers. Pull the rear seatback out of the Grand Prix, preferably with the help of an assistant. Is there anything else you need?if you need an auto tool you can click here: great tools

Posted on Oct 27, 2012


5 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: How do you get to the window switches in the 2004

You need to remove the door panel first.The module that contains the switches can be removed from the inside and then individual switches can be accessed from there.

Posted on Jul 08, 2009

  • 4 Answers

SOURCE: how do you remove the

There are torx head screws holding it on, you get at them from underneath.

Posted on Sep 04, 2009

  • 50 Answers

SOURCE: 2005 Pontiac Grand Prix power window switch

Disconnect the wire connector at the driver's window motor and install a test light or meter at the connector then operate the switch and see if the light or meter indicate proper function of the switch. If function is correct then the window motor/regulator is probably failed.

Posted on Feb 26, 2010

  • 2 Answers

SOURCE: How to remove the rear bumper cover on a pontiac

  1. Open the trunk.
  2. Remove the rear compartment sill plate. (Trim round the back edge of the trunk)
  3. Pull the left and right compartment side trim panels down to access the fascia bolts and nuts.
  4. Remove the tail lamps.
  5. Remove the fascia bolts and nuts from the rear bumper fascia 1 nut 1 bolt on each side near tail lights.
  6. Remove the push-in retainers from the top edge of the fascia.(4 plastic circles, pull up on center of cirle with screwdriver
  7. Raise and support the vehicle.
  8. From underneath Remove the push-in retainers from the rear bumper fascia (one on each side I think)
  9. Remove the fascia bolts from the rear bumper fascia. on on each side from, up where the facia connects to the quater panel)
  10. Remove the rear bumper fascia from the vehicle

Posted on May 08, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I adjust power windows on driver side Pontiac 1999 Grad Prix GP

there is no adjustment when changing a window motor or switch.

Sep 16, 2014 | 1999 Pontiac Grand Prix

1 Answer

94 pont grand prix how to disengage automatic locking when putting into gear

there is either a switch or key slot on shifter if no visual release you have to remove the cover and in shifter bse there will be a release

Jan 14, 2011 | 1994 Pontiac Grand Prix

1 Answer

I have a 1999 pontiac grand prix the window will not go up ? I have juice to the motor when i push the switch in the down position but nothing in the up. Do you think a switch or may be the motor?

I have a 99 grand prix, Its definitely the switch, I have fixed mine 4 times in 5 yrs (they are defective) I know because I have 2 grand prix and they both fail. Anyway, you can fix them if you know how, if you dont, see if you can borrow a friends grand prix switch to replace and try before you buy one (just a thought) and if you dont need your old switch, you can give it to Hope this helped, It sucks not being able to roll your window down because of the fear that it wont come back up. Especially in the winter/Rainy Season...Let us know if this helped.

Jun 30, 2010 | 1999 Pontiac Grand Prix

1 Answer

Front window motor when out and window is down how do you fix it on a 1999 pontiac grand prix

This sucks when it happens, I have 2 grand prix and have had this happened a few times, First, if you need to get it up RIGHT NOW! This instant even if its late at night? Well its do able. You can remove the paneling, dis engage the motor and prop it up. You might have to cut a piece of wood to hold it up temporarily so that someone wont break in and steal stuff. If you just need a fix it solution, there are a few possibilities, the first thing i would recommend would be to check the window switch, they tend to go bad often. You can do this by 2 ways, One? buy a new one, or 2 get a second grand prix switch from a friend or a neighbor or from someone else and plug it in. If this works, just replace the switch, if it doesnt, then remove the door paneling, and place electricity on one of the connectors on the motor (dont worry which side as they both receive electricity when going up or down) if this works, its a faulty switch, if it doesnt, it might be (95% sure) the motor itself.

Jun 06, 2010 | 1999 Pontiac Grand Prix

1 Answer

Changes 97 grand prix ignition switch, starts but shuts off, no security light. no power to windows,radio

I believe you need a Coded Key for your vehicle.. If your original key had a chip underneath the black cover of the key. You may need to get the ignition switch an the key from the Dealer, an once it is installed they will have to Code it.. Goodluck..

May 07, 2010 | 1997 Pontiac Grand Prix

1 Answer

Power window on 1999 pontiac grand prix gt 2 door driver side broke. motor still works but window wont stay up.

what I would recommend is that you will have to test the window actuator first. You will need to remove the door panel to get at the actuator. From there, just jump the actuator to see if the window goes up or down. Don't worry about which terminal is positive or negative, they are switched back and forth by the control switches.

Apr 03, 2010 | 1999 Pontiac Grand Prix

1 Answer

2005 grand prix

u can just remove the switch plate

Feb 25, 2010 | 2005 Pontiac Grand Prix

1 Answer

How do you get to the window switches in the 2004 pontiac grand prix? I have been trying to pry the piece off that covers the window buttons. is this the right thing to do?I don't see any screws. it looks...

You need to remove the door panel first.The module that contains the switches can be removed from the inside and then individual switches can be accessed from there.

Jul 03, 2009 | Pontiac Grand Prix Cars & Trucks

1 Answer

3 of the 4 power windows don't work

Probably window regulators. Requires removing door panel

Mar 24, 2009 | 1993 Pontiac Grand Prix

Not finding what you are looking for?
2004 Pontiac Grand Prix Logo

317 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

79024 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides