Question about SsangYong Rexton
If turbo not spinning or you have turbo lag, this problem is normal as the rexy didnt have enuff oxygen. Either your intake manifold is blocked by slimmery carbon after a time or you have some leaking vacuum hose
Posted on Feb 02, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
go to an empty parking lot
turn the wheel all the way to the right and drive in circle slowly
listen for a ticking noise or similar.
repeat in the left direction.
if you hear a ticking or clicking noise you likely have a bad CV joint. not a horridly expensive repair tho a necessary one
one other thing that will cause it is if the rubber boot surrounding the CV
joint is torn.
pleae take a moment to rate this solution.
Posted on Sep 04, 2009
It means you have a computerized system management problem. An electronic sensor component has either failed, or a condition has occurred that has put a sensor out of normal range and the onboard computer is letting you know of it. Any time that light comes on it sets a code that can be read with a special code reader.Most auto parts stores will retrieve the code/ codes for you at no cost. Be very cautious interpreting the codes meaning, because various engine conditions will set a code as well, because the condition will affect what the sensor measures. If you spend the money for the replacement sensor(never cheap) it won't shut the light off.Once installed auto parts stores will not take it back.Also 90 percent of the time it is defective wiring running to the sensor or bad grounding that causes the codes/codes.So unless you have a ton of high priced testing equipment and a lot of electronic engine control troubleshooting experience,you best take in in for service. One more thing. The most common reason the light comes on is a loose or defective gas cap.The computer monitors that too.
Posted on Nov 30, 2008
There's a number of possible reasons.
You don't mention if the engine turns over in the attempt, and you don't say which light is on.
A SsangYong service person can plug in a diagnostic tool to see what error codes are present.
Posted on Jan 26, 2010
Tips for a great answer:
Aug 11, 2015 | SsangYong Cars & Trucks
May 21, 2015 | 2005 SsangYong Rexton
Nov 24, 2013 | 2005 SsangYong Rexton RX
Aug 17, 2012 | 2006 SsangYong Rexton 270
Sep 08, 2017 | SsangYong Cars & Trucks
581 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: