Question about Cars & Trucks
1999 chrysler needs water pump having trouble removing it.
Here's a link Cherylene.Cool name.http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?fromSearchPage=true&pageId=0996b43f802d6621&partName=Removal+%26+Installation&partId=0996b43f802d6621
Posted on Oct 27, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Water pump is located on the side with all the belts. Find the water pump pully and LOOSEN the bolts that keep the pully on the shaft of the water pump. Once they are LOOSEN remove the belt. Then you can remove the pully bolts the rest of the way. Pully MIGHT be stuck on there, a couple of taps should loosen it enough to where you can pop it off by hand. Now if I recall this vechile correctly, there MIGHT be another pully that will hinder you. It's just easier to take it off right away. It's right above the water pump. I BELIVE it's an idler pully. Dosn't do anything but to help keep the belt on it's correct path. There should be one bolt in the middle of this pully, undo the bolt and pully will pop off. Make sure you REMEMBER how it was on. So that you put it back on the right way. Then, there are 2 or 3 different sized bolts that keep the water pump on. Remove the bolts, one at a time, and make sure you REMEMBER where they went. If you remember now, it will save time guessing later. Ok, once you are sure that ALL the bolts are removed, you can try to pop off the pump. If it dosn't come by hand, use a screw driver to pry a corner up and then do the rest by hand. Once it's off, it's time to clean the motor side of the pump. See, on these cars it's not a complete pump like it use to be, it's a half pump. Meaning, when you look at one side you can see the fins that move the water. Anyways, when you are at the parts store, pick up some emery cloth. It's sort of like sand paper. Well, once the pump is off, use a razor blade and scrape off the silcone that's on the block. Then use the emery cloth to make is nice and clean getting all of it off. Once that's complete, put the new gasket on the pump and reinstall. Put all the bolts in BEFORE tighting them down. And when you do tighten them, do it by hand! Using an air tool will break the bolt or strip the threads in the alunimium block and then it has to go to a mechanic. Once all the bolts are tight fill up the reservor to check for leaks. Also go back over the bolts one more time and make sure all are tight. Doing this now, will save you headace later. Then put the rest of the things back on in the order you took them off. That's it exepct for bleeding the cooling system. I assume you know how to do this, if not, let me know.
Posted on Oct 20, 2008
You have to remove the engine mount next to it, then remove the 4 bolts in the pulley Make sure you support the engine with a floor jack, use the jack to raise the engine a few inches on the that end helps getting the pulley bolts out.
Posted on Nov 17, 2008
Tips for a great answer:
May 05, 2016 | 1999 Chrysler 300M
Jan 29, 2015 | 2005 Chrysler 300
Apr 06, 2013 | Chrysler Cars & Trucks
Dec 05, 2012 | 1999 Chrysler 300M
Oct 26, 2012 | 1999 Chrysler 300M
Oct 26, 2012 | 1999 Chrysler 300M
Oct 14, 2011 | 2005 Chrysler 300
Feb 01, 2011 | 2002 Chrysler Concorde
Jan 18, 2010 | 1999 Chrysler 300M
Oct 04, 2009 | 1999 Chrysler 300M
49 people viewed this question
Usually answered in minutes!