If you disconnect the negative wire from battery for about five minutes it will reset any codes currently tripped on your system.
SOURCE: ''92 BUICK PARK AVENUE 3.8 HOW TO RESET CHANGE OIL
The reset button is located under the passenger side of the instrument panel.
With the ignition in the ON position, but the engine not started, use a pencil to push the reset button, holding it for five seconds.
After this, the "Change Oil Soon" lamp will flash four times. This indicates that the Oil Life Monitor System has acknowledged the oil change.
SOURCE: 2000 Buick Park Avenue Service engine soon light
need to take car somewhere to have the code read with a scanner,try parts stores first some will do it for free if not the dealers have them
SOURCE: 98 Buick Park Avenue (Turbo) P0717 fault code,
CODE PO717 IS - A/T INPUT SHAFT SPEED SENSOR LOW INPUT CONDITIONS.YOUR INPUT SHAFT SPEED SENSOR COULD BE DEFECTIVE.CHANGE FLUID + FILTER IF IT HAVE NOT BEEN CHANGED IN A LONG PERIOD OF TIME.
SOURCE: how do I reset service engine soon on a buick park
U can either do it with a basic code reader or u can erase/reset it by disconnecting the battery NEGATIVE FOR 5 MIN'S
25 views
Usually answered in minutes!
×