Question about Ford Bantam
Rear brake diagram
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Behind the brake mounting plate there is a small hole with a rubber plug on the top portion.
Remove the plug. Look from the back of the vehicle and you will see a star wheel in the hole. Stick
a long skinny screw driver with a large blade and rotate it in the direction of risistance.(clockwise).
You will hear a spring poping noise. Rotate a few times and the drums will turn freely.
Then you can slide the drums off.
Posted on Jul 04, 2009
loosen of the hand-brake adjustment and press the brake pedal a few times to self adjust the rear brakes.
Re-tighten the handbrake adj last.
Front brake sounds like a seized caliper,If possible remove caliper and clean and lubricate the piston.
This may work but replacement caliper may be the only other solution.Make sure the caliper slides are also clean and lubricated and the brake pads are in good order.(TRY THIS FIRST)
Also new brake shoes can make the pedal feel spongy for a couple of hundred miles until they have been run in.
Posted on Jul 04, 2010
1996 will be a fuel injection unless you are refering to the monopoint fuel injection if fitted ,never heard of a bantem though so do you mean a fiesta ?or is the year wrong and its a 86
Posted on May 19, 2012
Tips for a great answer:
Sep 19, 2016 | 2007 Ford Bantam 1.3i
Feb 21, 2015 | 2006 Ford Bantam 1.6i
Aug 08, 2014 | 2007 Ford Bantam 1.3i
Jul 15, 2014 | 2007 Ford Bantam 1.3i
Jul 25, 2013 | Cars & Trucks
Jul 04, 2010 | 2003 Ford ZX2
173 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: