Question about Mercedes-Benz C230

Open Question

I have a 1999 mercedes benz with the trouble codes p0136-p0141-p0300 what do they mean

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

dsacco86
  • 1077 Answers

SOURCE: 1999 Nisian Maxima and need to know what codes mean?

P1320 Ignition Signal
Signal wire from distributor
P0325 Knock Sensor 1 Circuit Malfunction (Bank 1 or Single Sensor)
O2 senor ( The one before the cat converter )
P0300 Random/Multiple Cylinder Misfire Detected
The misfire detection monitor, a software strategy built into the computer, is designed to detect an engine misfire. The computer can also normally identify the specific cylinder in which the misfire has occurred. A misfire is nothing more than a lack of combustion, which can be caused by poor fuel quality or metering, low compression, lack of spark or unmetered air entering the engine. There are other possible, less obvious causes as well, such as uncommanded Exhaust Gas Recirculatin (EGR), flow. When the misfire monitor detects a misfire, it will trigger the check engine light with the specific cylinder number as the last digit in the P030X code. For instance cylinder 1 misfire is P0301, cylinder 2 is P0302 etc. In this case we have either multiple cylinders misfiring, or the computer simply can't determine the specific cylinder, and as such we are left with the P0300 in computer memory.
Possible Causes:
Fuel injectors, related wiring, sensors and computer issues
Running out of gas, or poor fuel quality
Evaporative emissions system (EVAP) concerns: fuel vapors leaking into engine
Incorrect fuel pressure

EGR system concerns: leaking EGR valve or restricted ports
Base engine concerns: low compression, valve train problems and timing issues
Ignition system concerns including, but not limited to:
Faulty spark plugs
Faulty coil or related wiring
Ignition module or related wiring issues
Ignition related sensor faults or wiring issues

Posted on Apr 13, 2009

keithheavili
  • 410 Answers

SOURCE: Vehicle start shaking and died. Has a trouble code P0300

Error code P0300 means that you are having multiple/random cylinder misfires.  I would start with changing all of the spark plugs and see if that will fix it.  You will have to have the code reset at an auto parts store.  If that doesn't work let me know and we can progress down the line.

Posted on May 18, 2009

mx5turbo92
  • 545 Answers

SOURCE: i need the mercedes benz 1999 clk 430 radio code

AR82.60-P-7502-01A Coding Radio
(MODEL all with CODE (750) Radio Becker Europa 2000 with CODE (751) Radio Becker Grand Prix 2000 with RDS)

  1. If the radio is disconnected from the power supply, it is not operational when re-connected. After switching on the ignition and the radio, the readout CODE appears in the display.
  2. The code number for the radio is advised to you on the enclosed CODE CARD.
  3. To enter the first digit of the code number, you have to continue pressing station button 1 until the correct digit appears in the display. Adopt the same procedure for the second, third and fourth digits.
  4. Once you have entered the correct code number with the station buttons 1, 2, 3, 4 and confirmed the entry with the SEEK button (press down), the readout CODE disappears. The radio can now be operated.
  5. If you enter a wrong code three times, you must wait 15 minutes before making a new entry. In addition, if 9 incorrect entries are made, the radio will then not operate for 24 hours. During this time the radio and the ignition (terminal 15) must remain switched on.
AR82.60-P-7502-01B Coding Radio
(MODEL all with CODE (353) Audio 30 APS with CODE (510a) Radio MB Exquisit with traffic news decoder, with RDS (Becker) with CODE (512a) Radio MB Special with traffic news decoder, with RDS.)

  1. If the radio is disconnected from the power supply, it cannot be operated by simply reconnecting. After switching on the ignition and the radio the word "CODE" appears in the display on the radio.
  2. The code number for the radio is given on the enclosed CODE CARD.
  3. Enter the code number with the station button, e.g. number 1, station button 1. After entering the first number the word "CODE" disappears and the number entered appears followed by 4 dashes. The next character to be entered flashes. After entering all five numbers, the first character starts flashing again. In this state the code number can be written over as frequently as desired. A correction can be made only by entering the complete code number again.
  4. Confirm code number: Press TUNE, AUTO/SEEK or SC button. The radio automatically switches on and indicates the radio station or frequency stored with station button 1.
  5. If an incorrect code number is entered and confirmed, the word "CODE" appears again on the display. If an incorrect code is entered three times the word "WAIT" appears on the display and the radio locks up for approx. 10 min. If the code is entered incorrectly three times again the radio locks up again for 10 min. Three more incorrect entries (a total of 9 incorrect attempts) increase the lock-up time to 60 min. Another three incorrect entries lock up the radio for another 60 min. The waiting time runs only when the radio is switched on.

Posted on Dec 17, 2009

  • 1 Answer

SOURCE: 1995 mercedes benz s320 radio codes

radio ask for code

Posted on May 14, 2010

steve_e_uk
  • 1675 Answers

SOURCE: I have an engine fault code of p0170 on a mercedes

hi this is showing fuel trim bank 1 malfunction, this could be caused by the following things, intake leak, AIR system, fuel pressure/pump, injector/s EVAP canister purge valve, or HO2S ( air fuel mix incorrect) if it starts and runs fine, i do not think it will be fuel pump, or the injectors as this would make it run rough or even not start at all, if it was an intake leak, you would be suffering from high rev's when you start the car and would take a long time for the rev's to come down, so really, that just leaves the HO2S (sensor/s) these are located one on the exhaust manifold ( from engine follow exhaust manifold you will come to a things sticking out with some wires on) this is HO2S sensor bank 1, or if you look under the car on the exhaust, just past the catalytic converter you will see the same thing, this is HO2S sensor bank 2, it may be either of these, but i possibly would go for the first one, EVAP..it could be, if you have an air leak on it, the EVAP can be found under the hood/bonnet, at the front on the right hand side as you look into the engine/motor bay just in front of the screen was bottle...hope this helps

Posted on Oct 02, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have 4 codes P0306 P1181 P0141 P0136 is there easy fix? Also vibration at high speeds and passenger aide in front sounds like humming any ideas 2000 Volvo S80 2.9 Non turbo


There is no "easy fix" as only 2 of the 4 codes are for the same thing...for the P0136 and P0141, its probably a bad Bank 1 sensor 2 oxygen sensor..the P0306 means cylinder 6 is misfiring (it could be bad spark plug, bad coil, bad injector, carbon on valves, low compression) and P1181 is showing a fuel delivery issue high pressure...as for the vibration, have all tires checked for balance and hum on passenger side is possibly a bad wheel bearing...and and all is best to have checked by your mechanic.

Apr 05, 2015 | 2000 Volvo S80

1 Answer

What are some solution for my miss fire codes for my car p0300 p0302 I have new cord spark plugs


what year is your benz? what is the motor identification? 104? 112? 113? 271? 272?

Sep 22, 2014 | Mercedes-Benz C-Class Cars & Trucks

2 Answers

What does the codes p0442,p0136 &p0141 mean on my 2001 ford taurus it failed inspection for these codes


P0442 FORD - Evaporative Emission System Leak Detected Small Leak

Possible causes- Missing or loose fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- EVAP canister or fuel tank leaks
- EVAP system hose leaking
- Fuel tank leaking
P0136 - O2 Sensor Circuit Malfunction Bank 1 Sensor 2
Possible causes- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

P0141 FORD - O2 Heater Circuit Bank 1 Sensor 2

Possible causes- Faulty Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit fuse
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit open shorted to ground
- Heated Oxygen Sensor (H2OS) Bank 1 Sensor 2 circuit poor electrical connection
- Faulty Engine Control Module (ECM)

Sep 27, 2012 | 2001 Ford Taurus

1 Answer

06 c230 sports mercedes code p0300, p0301, p0304


I think this is a Coil problem. try replacing coil. If not, it is a MAF problem. 06 wire should still be fine now.

Feb 15, 2012 | Mercedes-Benz C230 Cars & Trucks

2 Answers

2001tiburoncomputor codes, po136 & 141 what do they refer to.


P0136 = Oxygen Sensor Circuit Malfunction (Bank1, Sensor2)
P0141 = Oxygen Sensor Heater Circuit Malfunction (Bank1, Sensor2)

CHECK WIRING BEFORE REPLACING SENSORS

If 4 cylinder engine, there are only two O2 Sensors - Sensor 1 is on top, Sensor 2 is at the bottom

If 6 cylinder, there are four (4) O2 sensors (Bank1, Sensor2 is on the firewall side of this engine and is referred to as the 'DOWNSTREAM' sensor (the one AFTER the Catalytic Converter)

Aug 25, 2011 | Hyundai Tiburon Cars & Trucks

4 Answers

I have four codes. P0136, P0141, P0171, P0401.


p0136 and p0141 are o2 sensors and p0401 is a egr flow and the p0171 means its running lean on low bank 1

Jun 30, 2010 | 1996 Ford Econoline

1 Answer

CHECK ENGEINE LIGHT GIVE CODE 300 AND 400 FOR


P0300 Random Misfire Detected

P0400 means random/multiple cylinder misfires.

Replace your spark plug cables. All of them.

Hope helped.

Nov 13, 2009 | Mercedes-Benz ML-Class Cars & Trucks

1 Answer

My car is xg300 Hyundai the code showing up are p01191 &p1193 , p0136, p0141 what are they will it cost me


Electronic Throttle System codes (P1191 & 1193), Limp Home mode & Low RPM (Detected RPM below 470). This is usually cause by either a sticking throttle plate or an intake air hose leak.

P0136 - O2 Sensor Malfunction (Bank 1, sensor 2), P0141 - O2 Sensor Heater Circuit Malfunction (Bank 1, Sensor 2). Either the sensor is broken, it's been unplugged, or the wiring has been damaged.

Oct 13, 2009 | 2001 Hyundai XG300

3 Answers

Troble code P0170


Trouble Code: P0170 (3.4L V6 VIN V Auto)
Fuel System Too Rich or Too Lean (Bank 1) Print this code dataprint_icon_codes.gif Number of Trips to Set Code: 2
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Trouble Code Conditions:
DTC P0100, P0101, P0110, P0115, P0120, P0121, P0130, P0133, P0136, P0135, P0136, P0141, P0153, P0155, P0201-206, P0300, P0301-P0306, P0401, P0402 and P0441 not set, engine running in closed loop at a stable engine speed, and the PCM detected the lean or rich fuel trim correction value was more than or less than a calibrated limit in memory.

Possible Causes:
  • Air leaks present in the exhaust manifold or exhaust pipes
  • Air being drawn in from leaks in engine gaskets or other seals
  • Base engine "mechanical" fault affecting one or more cylinders
  • Fuel control sensor is out of calibration (i.e., ECT, IAT or MAF)
  • Fuel delivery system supplying too much or too little fuel at idle or cruise (e.g., faulty fuel pump or dirty, restricted fuel filter)
  • One or more fuel injectors is dirty, leaking or stuck open/closed
  • HO2S element is contaminated, damaged or it has failed

Oct 11, 2009 | 1995 Toyota Tacoma

1 Answer

Radio code for 1995 mercedez benz E320


Usually the Mercedes dealer will give you the code if you are the owner of the vehicle and they might need the VIN# and sometimes the serial# on the radio too.

Apr 10, 2009 | 1999 Mercedes-Benz E-Class

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...