Question about 1989 Pontiac 6000

Open Question

No spark need to ck. crank sensor

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Truck won't start

If by your description I'm assuming you say "NO START" you mean it cranks but don't start..? Depending on the YR, make & model Poss. defective module? or switch itself, pickup (if app) Wrong plugs, mass air flow sensor (if app) Any C/E LTS? Scan PCM , also ck coolant system readings & ck emissions when running., crank & cam sensors are popular for that problem along with the module and pickup coil too. It's Long list but I would start with a scan of the PCM & check those crank & cam sensors 1st. Good Luck

Nov 26, 2015 | Cars & Trucks

1 Answer

2005 chevy cavalier no spark to spark plugs

need to scann the car to ck for codes posible crank sensor or module etc

Oct 20, 2014 | 2005 Chevrolet Cavalier

1 Answer

2000 chevrolet impala top speed 20 mile per hr. was told cam sensor trouble. and cylinder trouble

try first fuel pressure ck then go to the crank sensor how many km,s does it have ,could have bad fuel change the filter then do the test ther is crank fuse too to ck also ck the coil packs for spark get back too me if ya wood thks again for your time The Farmer

Mar 18, 2014 | 2000 Chevrolet Impala

1 Answer

2002 4runner wont start

You could see if spark plugs have spark if not ck crank sensor or you got a tank of bad gas.

Mar 05, 2014 | Toyota 4Runner Cars & Trucks

1 Answer

My 93 grand am will crank but not start. Is there any sensor that might be the problem?

ck for spark,, spark tester,,or take a another spark plug take one wire off plug spark plug into it lay it on the manifold have someone turn the motor over ck spark,,coil are common,,

Apr 18, 2010 | 1993 Pontiac Grand Am

1 Answer

What can keep a 1997 buick lesabre from cranking up?

I assume that since it is sparking the engine is turning over if this is the case ck the crank sensor

Feb 11, 2010 | 1997 Buick LeSabre

2 Answers

The car has no spark and we have replaced the IGN module

Check all fuses, and check to see if your new module is recieving the crank signal from the crank position sensor. Also check to see if the module is getting power, check for an open circut in fusable links off the starter motor,, Does the cars computer have power check this by seeing if the service engine soon light is on with the key in run position

Jan 21, 2010 | 1992 Buick Park Avenue

1 Answer

Car wont start

No spark, ck the crank position sensor. bolted on engine at the front crank pully. Good luck. unplug and plug it back in to clean the wire connection/

Jun 03, 2009 | 1990 Dodge Dynasty

2 Answers

Car won't start Buick Lesabre 1998

Fuel pump is in tank, but ck the crankshaft sensor front of engine near pully for proper connection

May 28, 2009 | 2000 Buick LeSabre

1 Answer

Car will not start. please help.

ck the crank position sensor. It's on the front of ehgine at the crank pully. If there seems to be a fuel problem, ck the maf sensor. first sensor out of air cleaner. good luck

Apr 15, 2009 | 1993 Buick Century

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts


Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides