Question about Cars & Trucks

Open Question

No injector pulse 99 gmc topkick

No injector pulse

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 194 Answers

SOURCE: 1990 gmc 6500 topkick with no spark or injector pulse

You are jumping to conclusions. Slow down.
No spark AND no injector pulse indicates none of the desired outputs were triggered. The ignition module makes spark when it receives a crankshaft position sensor signal, and then transfers control of that spark to the computer after it starts. The module takes its crank sensor signal and generates an RPM count that it forwards to the PCM(main computer) which is used for triggering the injectors and controlling timing. SO, if you had a bad crank sensor OR a bad ignition module, you could lose both spark AND fuel. a coil would not disable injector pulse. modules RARELY fail in a manner that disables RPM reference to the computer causing it to not fire the injectors...At this point, I would TEST the crank sensor as the next step. If its easier, 1 of the wires on the module goes directly there so you can test the crank sensor at the module.

Posted on Sep 18, 2009

Testimonial: "great info, thanks!"

ourhowse
  • 2007 Answers

SOURCE: 1995 GMC Topkick starts and dies immediatly. Fuel

Mass air flow sensor.

Posted on Oct 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 gmc pickup, getting spark, & fuel to the rail, injectors not pulseing.no fuel comeing from injectors. Could it be the ignition module ?


Backprobe with a t pin or straight pin the connectors on the injectors and spin the engine over to see if they are being pulsed. One terminal should pulse and the other will not. Is it 350 or 454 ?

Jul 05, 2015 | GMC Cars & Trucks

1 Answer

1994 GMC Topkick not getting power from the fuel pump. Where is the fuel pump relay located?


Before going there, check your INERTIA SWITCH (INTERTIAL CUTOFF SWITCH). A small accident or a sharp bump can cause the cutoff switch to trip. The switch is located adjacent to the passenger side rear shock tower, and there is a pushbutton to reset (on most Topkick tucks). Carbureted Topkick trucks do not have cutoff switches, and some custom trucks have the inertia switch relocated.

May 13, 2015 | GMC Cars & Trucks

2 Answers

06 gmc 4.3 liter cranks over will not start no fire starting fluid did not effect condition


check that the cam shaft is turning ( broken belt/ chain. check that the immobiliser is operational

Feb 02, 2014 | 2006 GMC Sierra

1 Answer

Injectors not pulsing on a1993 gmc truck


i thind the engin has a trotle body unless it is a desiel

Mar 19, 2010 | 1993 GMC Sierra

1 Answer

1990 gmc 6500 topkick with no spark or injector pulse. all 4 wires on the ignition coil have battery voltage with key on. is coil shorted or is the ignition module bad?


You are jumping to conclusions. Slow down.
No spark AND no injector pulse indicates none of the desired outputs were triggered. The ignition module makes spark when it receives a crankshaft position sensor signal, and then transfers control of that spark to the computer after it starts. The module takes its crank sensor signal and generates an RPM count that it forwards to the PCM(main computer) which is used for triggering the injectors and controlling timing. SO, if you had a bad crank sensor OR a bad ignition module, you could lose both spark AND fuel. a coil would not disable injector pulse. modules RARELY fail in a manner that disables RPM reference to the computer causing it to not fire the injectors...At this point, I would TEST the crank sensor as the next step. If its easier, 1 of the wires on the module goes directly there so you can test the crank sensor at the module.

Sep 18, 2009 | 1990 GMC K3500

1 Answer

Have 99 sierra has spark and fuel to intake but wont start sometimes sputters but no go please help


You need to find out if you have enough fuel pressure, and if you have injector pulse. A noid light is a simple kind of test light that you can get at a parts house to test injector pulse. Unplug an injector and plug the noid light into the harness. Have someone crank the engine, if it flashes then your injectors are firing. Check all the fuses under the hood. You should have 55 to 60 psi fuel pressure.

May 01, 2009 | 1999 GMC Sierra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...