Question about Cars & Trucks

Open Question

I have rear blinkers but no brake lights on 99 freightliner fl70

The rear blinkers are working but I have no brake lights. bulbs are good. is there a relay for the brake lights

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 7 Answers

SOURCE: 99 Rodeo Right turn signal makes brake lights blink

TURN SIGNALS WILL FEED BACK THROUGH THE TURN SIGNAL SWITCH.THEY ARE INDEPENDENT OUT SIDE ON THE CAR BUT NOT IN THE SIGNAL SWITCH.REPLACE THE SIGNAL SWITCH

Posted on Jan 03, 2009

Ad
  • 718 Answers

SOURCE: Brake Light Doesn't

Yes. Look on the brake pedal lever under the dask. When the brake pedal is pressed the switch is engaged. This is easy enough to replace. If you see two switches, the other one is probably a switch to disable the cruise control.

Posted on May 08, 2009

  • 225 Answers

SOURCE: 1997 GMC Sierra p/u. Brake light & blinker out. Taillights ok.

I have notice that this is a common problem. The socket most of the time goes bad, I don't know why but they just do. You can pick them up at any parts store for around 5.00 each. If you don't have a volt meter and ground straps to test it right, then I would try changing the sockets out. Quick and easy. Let us know how it goes.

Posted on Aug 30, 2009

  • 4 Answers

SOURCE: 99 Chevy Tahoe... Rear turn signals, brake lights, and hazards

I had this problem, and to be honest, it happened to the left side about a week later...it's the board that the bulbs plug into...it's a very common problem with this model. So popular that you can normally get the socket board off the shelf at a parts store! it's extremely simple to replace, and I replaced all the bulbs at the same time!

Posted on Oct 11, 2009

  • 2 Answers

SOURCE: I have a 98 freightliner fl70. All the tail light

on that fl 70 their should be a jump box on it and u should find ur problem

Posted on Feb 23, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My brake lights and rear blinkers are not working. I have replaced the bulbs in both brake lights. What next?


most blinkers uses relays, and when they flashes fast one light is out, but you replaced your burnt bulb might be a bad relay.

Sep 17, 2012 | 2007 Hummer H2 SUT

2 Answers

The tail lights on my 1999 Jetta don't work. Turn signal and brake lights work fine.


CHECK TAIL LIGHT BULBS.IF BULBS CHECK OUT GOOD PROBLEM COULD BE CORRODED BULB SOCKETS OR BROKEN LOOSE WIRE IN CIRCUIT.

Nov 08, 2010 | Volkswagen Jetta Cars & Trucks

1 Answer

2007 Ford Edge: Rear Blinkers/Brake Lights out; Not bulbs or fuse


Sounds like you need bulbs on both rear side lights. Does the blinker flassh really fast?

Feb 25, 2010 | 2007 Ford Edge SEL Plus

3 Answers

The brake lights on my 1999 saturn sl do not work. The bar on the rear window functions. The bulbs and fuse is ok--what is the problem


does the third brake light work when braking ? the bar on the rear window? if not replace brake light switch on brake pedel

Jul 03, 2009 | 2000 Saturn SL

2 Answers

Right rear brake light and blinker dont work


when you use the right turn signal, does it blink faster?. Could it be the bulb holder is damaged or rusty?

May 16, 2009 | 2001 Plymouth Neon

2 Answers

1995 GMC Sierra 4x4 - Having tail light problems


Most likely it is a groung issue where your rear wiring harness grounds to the frame. There may also be additional grounds for the wiring harness along the frame before the ground by the rear bumper. One other option is to make sure you have the correct bulbs in. I have seen something pretty similar to that caused by improper bulbs. Make sure your bulbs for the brake light/turn signal have dual filaments as that could be an indication you have the wrong ones; if you have the bulbs I think you do.

Mar 12, 2009 | 1995 GMC Sierra

1 Answer

99 mercury mystide had rear running light broken


If the driver's side tail light is working, it's not a fuse. Use a test light to check for power at the bulb holder. One terminal will be for tail light, the other for brake/turn light. If the is constant power for tail light, replace bulb. If no power, trace wiring from bulb holder to driver's side junction. Probable broken wire between the two tail lights.

Jan 16, 2009 | 1999 Mercury Mystique

1 Answer

99 Rodeo Right turn signal makes brake lights blink


TURN SIGNALS WILL FEED BACK THROUGH THE TURN SIGNAL SWITCH.THEY ARE INDEPENDENT OUT SIDE ON THE CAR BUT NOT IN THE SIGNAL SWITCH.REPLACE THE SIGNAL SWITCH

Jan 02, 2009 | 1999 Isuzu Rodeo

3 Answers

99 Rodeo Right turn signal makes brake lights blink


could be both unrelated issues at the same time

worn indicator stalk
faulty relays

adjust or test the brake pedal stop light switch

Mar 22, 2017 | 1998 Isuzu Amigo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

578 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

john h

Level 3 Expert

15314 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...