Question about Cars & Trucks

Open Question

Torque setting for isuzu 6hh1 cylinder head - Cars & Trucks

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 88 Answers

SOURCE: Hi I'm looking for cylinder head torque settings for a 1992 BMW 316/318 e36

BMW cylinder torque setting all models

According to my service manual as follows.

Cyl head to engine block (torx e12 M10 bolts)

Stage 1 30nm (22 ft – lb)
Stage 2 + 90 degrees
Stage 3 + 90 degrees

Cyl head to lower timing chain cover 10nm (89in – lb)

The tightening sequence is from inside to outside crossover as normal. Loosening sequence is from outside to inside crossover. Remember to set torque wrench at low setting and work gradually up through the whole sequence until you get the desired torque.

Posted on Aug 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

ISUZU FTR 800.Head,mains and big end torques in newton meters if possible 6HH1


call ISUZU in your country yet, (unstated country) we are USA here.
call them get the book. ?
our online books do not cover
huge 6HH1 engine, if any kind here.
sorry

Mar 27, 2017 | Isuzu Cars & Trucks

1 Answer

NEED TORQUE SETTINGS ON ISUZU 6HH1


in what country.?
the engine? a huge 6hh1
what car. (its not a car, nor a trunk)
what year.? guess at 2000?

you know, to look it up, on line , those are the first questions,
meaning i cant look up..
but of you google all day 6HH1. (i didnt)

seem you have this?

25931984-hetu3otge4ewu0eo3szpgk2x-2-0.jpg ???
KK/KL-LT233J2 (2000) ah but we dont have those here.
try Isuzu in your country.? "books"

Oct 30, 2015 | Isuzu Cars & Trucks

1 Answer

Isuzu 1999 v6 engine 3.2 DOHC cylinder head


wow , no car body stated, so all online FSM , cant look it up.
as they ask year, body first. or you get nothing..

did your read the FSM first?
seems not.
are they TTY bolts, ? the book says, so. and would be question one

some are not set with torque, but are set by turns angles.
if not TTY bolts (torque to yield)
do you think 15 year old bolts are still good. Id bet not.
those are the first 2 questions, on all cars this old.

at random i picked trooper. and it had a 3.2 option and the
head torque is
Step 1: 21 ft. lbs.
Step 2: 47 ft. lbs.

on the head page the first line reads

"Use new head bolts when installing the cylinder head."

doesnt say way, only that.... you can google the why
or join a real isuzu form and ask, THEY KNOW.

and use the L marked gasket on left bank.

Aug 27, 2014 | Isuzu Cars & Trucks

1 Answer

Cylinder head bolt tightening sequence for isuzu rodeo 1998


1998 Isuzu Truck Rodeo 2WD 2.2L MFI DOHC 4cyl

The Head Bolt Torque

Torque sequence ----------------- front ' 7 3 1 5 9 ' of ' ' engine ' 8 4 2 6 10 ' ----------------- Step 1: torque bolts in sequence to 18 Ft/Lbs Step 2: turn bolts in sequence an additional 90-degrees Step 3: turn bolts in sequence an additional 90-degrees Step 4: turn bolts in sequence an additional 90-degrees recheck final torque in sequence

1998 Isuzu Truck Rodeo 2WD 3.2L MFI DOHC 6cyl

The Head Bolt Torque

Torque sequence -------------- front ' 6 1 3 7 ' of ' ' engine ' 5 2 4 8 ' -------------- Step 1: torque to 20 Ft/Lbs Step 2: torque to 47 Ft/Lbs recheck final torque in sequence

Jan 15, 2013 | 1990 Isuzu Spacecab

2 Answers

What are the head torque specs?


1996 Isuzu Truck Hombre 2.2L SFI 4cyl

zjlimited_545.jpg

Fig.: Cylinder head bolt torque sequence-2.2L engine

Apply a coating of 1052080 or equivalent sealer to the cylinder head bolt threads. Install the cylinder head bolts (within 15 minutes of sealer application), then tighten them in the proper sequence first to a torque of 46 ft. lbs. (63 Nm) for long bolts or to 43 ft. lbs. (58 Nm) for short bolts and then tighten all bolts an additional 90 degree turn using a torque angle meter.

Hope this helps (remember to rate this answer).

Jan 25, 2011 | 1996 Isuzu Hombre

1 Answer

Corsa head torque settings?


for 4ee1
cylinder head
stage 1: 40Nm
stage 2: 60° - 75°
stage 3: 60 - 75°
let me know if u need any more of those
take care

Apr 24, 2009 | 2000 Isuzu Amigo

2 Answers

Cylinder head torque settings 1990 2.6L isuzu motor


From front to back is this:


7 3 1 5 9



8 4 2 6 10



First torque value is 58 ft lbs.....then final torgue is 72 ft lbs.

Mar 21, 2009 | 1990 Isuzu Spacecab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

363 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...