Question about 2001 Mercedes-Benz C-Class

1 Answer

How to make reset manwal if you want turn off a light

I have a light called steering angle how to turn it of when i fix the problem

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mercedes-Benz Master
  • 75,197 Answers

Whenever this warning light or any other stays on in the dash it is indicating that the systems control module (or the system sensor in the case of lights like low oil pressure, door open indicators etc.) has detected a fault, it then disables the system (this applies to ABS,TCS, TCM, SRS and BCM faults and others) as long as the light is on. You must now have the dealer hook up a special electronic diagnostic tool and "scan" the system for the fault code that is stored for the problem(s)

Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module

Posted on Oct 26, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

"VDC" and "SLIP" light came on at same time and I can't turn them off..?


07 Armada here. Same issue and it was the steering angle differential. I would take it to an alignment shop and have it checked. Those lights come on when the steering wheel input and the front steering angle are telling the sensor different things.

Jun 14, 2015 | 2009 Nissan Armada

1 Answer

I replaced clock spring on nissan armada now my vdc and slip indicator will not go off how to correct


You will have to take this to a car mechanic. When you disconnect the battery, it resets your steering angle. This is an easy fix. they will hook a computer up to your car and relearn the steering angle.

Oct 07, 2014 | 2006 Nissan Armada

1 Answer

How do i rove the clock spring 2012 nissian par\th finder


remove clock spring in steering wheel.
step 1 , disconnect battery minus lug.
then defeat air bags as the FSM book directs,(or great danger waits)
BOOM
Battery disonn.folly 110. "under collateral damage"

quote
Whenever the negative battery cable is disconnected the following components will require resetting. The Idle Air Volume Learning, Steering Angle Sensor Neutral Position, Sunroof Memory Reset/Initialization, Automatic Drive Positioner System, Audio presets and Navigation. Use the CONSULT-III diagnostic tool, or equivalent to perform the required resets. As necessary, refer to Battery Reconnect/Relearn Procedures.
he automatic back door system, if equipped, must be initialized anytime the battery has been disconnected. Close the back door. Open the back door with the automatic open feature. Do not stop the process until the back door opens completely.
end .

begin:
  1. Disconnect the negative battery cable. (wait 30min)
  2. Disconnect the positive battery cable.
  3. Set the front wheels in the straight-ahead position.
  4. Remove the air bag module.

  1. Remove the steering wheel.
  2. Remove the column cover upper and lower.
  3. Disconnect wiper and washer switch connector. Then while pressing tabs, pull wiper and washer switch away from spiral cable to remove.
Disconnect lighting and turn signal switch connector. Then while pressing tabs, pull lighting and turn signal switch toward driver door to remove.
  1. Remove the screws. Then while pressing the tab, pull the spiral cable away from steering column assembly. CAUTION Do not disassemble spiral cable. Do not apply lubricant to the spiral cable.
  2. Disconnect the spiral cable connectors.
With the steering linkage disconnected, the spiral cable may snap by turning the steering wheel beyond the limited number of turns. The spiral cable can be turned counterclockwise about 2.5 turns from the neutral position.
end remove.
to install, read the FSM book
or login to alldata.com


the cars steering angle is lost in the process.
so.....?????
steering angle sensor calibration after installing spiral cable.

Jun 25, 2014 | 2002 Nissan Pathfinder

2 Answers

How to reset sensor


The steering angle sensor is faulty and should be replaced. Once replaced it will need to be coded with a special tool. There is not a way to reset the sensor without the special tool.

Mar 19, 2014 | 2008 BMW Z4 2.0i

1 Answer

How to reset sensor


Steering angle sensor can only be reset with a special diagnostic tool. Sorry.

Mar 19, 2014 | 2008 BMW Z4 2.0i

2 Answers

ASB,ESP INOPRATIVE


All you have to do after replacing the battery and the bas/esp light comes on is drive the vehicle. While your driving around is will allow the steering angle sensor to relearn. That's only if it says "bas/esp see owners manual" displayed on the cluster.

Sep 20, 2012 | 2007 Mercedes-Benz C-Class

2 Answers

Steering angle sensor and ESP/BAS


You must get the steering system scanned for a fault code that was set when the light was turned on. This steering is very complex and not designed to be worked on by a home mechanic, it is just to complex and requires special tools and training to repair.

Sep 13, 2012 | 2007 Dodge Charger SE

3 Answers

Battery went low. when charged VDC light and slp light came on.Any quick fix Thanks.


light should go out, when you start driving. if it does not, than you will have to go to nissan dealer and have your "steering angle sensor" recalibrated. you need nissan scan tool to do that. there is a procedure for it that may need to be performed.

Dec 11, 2010 | 2008 Nissan Frontier

1 Answer

Recode steering angle sensor


For recode the steering angle sensor you must connect a diagnosis scantool to the data link connector of the car in order to access the ESP ECU (Electronic Control Unit), in other words programm again the steering angle sensor in the ESP ECU. Select the steering angle sensor programming (learning) menu, and follow the steps: put steering wheel in straight direction, then turn steering wheel to the left direction less 15 degrees, then to the right direction less 15 degrees, put steering wheel in straight direction again until the programming was done. Then the ESP light will turns OFF.

Aug 20, 2010 | Audi A6 Cars & Trucks

Not finding what you are looking for?
2001 Mercedes-Benz C-Class Logo

192 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...