Question about Cars & Trucks

Open Question

Opening and closing flip grip multi tool

I can't figure out how to get all the tools to fold in and out

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 4977 Answers

SOURCE: What rod or screw or

going by your question i`d say you don`t have the ability to perform this job yourself.to just adjust the front end alignment you don`t need to remove any components.you do need an alignment machine to get the angles set to specs,there are 3 angles that need to be checked,castor camber and toe-in otherwise your tires will wear and the car won`t go down the road straight.

Posted on May 03, 2011

Ad
  • 3911 Answers

SOURCE: I can't seem to figure

well ms dragon on my cheap subarus, saturns, hyundais, the tool is snapped into the fuse panel cover. so you remove the tool, use it to pull the fuse, then put it back in. i would think for the extra bucks involved in purchasing a lexus there would be one provided there also. have you looked? it is usually a different and bright color.

auto parts stores are good places to buy auto parts and auto repair tools, have you looked?

on the other hand i have always found good old needle nose pliers, hardware stores and auto parts stores, are handy for this as they are not plastic and hence do not have a tendency to slip off.

when you start to pull them, note they are color coded, obey the color codes when putting them back in.

Posted on Jul 19, 2011

  • 30 Answers

SOURCE: How to figure out if a car can do the diagnostic by obd2 diagnostic tool?

You can view the website , that may help

http://www.xcardiag.com/service/

there are 3 step you get to know if the your car can test by obd2 diagnostic tool

1. the year of vehicle , mostly after 1996

2. check out the System Information Label of your car

3. View the vehicle owner's manual or ask your dealer directly

Posted on May 21, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace multi function relay


maybe what do the step by step from the parts store tell you..

Feb 24, 2013 | 1999 Dodge Durango

1 Answer

Quick disconnect tool is not helpful on disconnecting fuel line from fuel filter on 92 F 150 w/4.9L


there are a few different tools and some work well and others just plain ****. Patience is the key sometimes with poor quality tools. If yo have the multi quick dis connect tool that is like the swiss army knife of quick disconnect tools, thats the worst one.
My neighbor had trouble with a quick disconnect fitting and came to get me. when I got in his garage he said "here's the tool." I threw it in the trash and came back to get my set of quick disconnects. It tool me longer to open the case, get the tool out and put it back than the time it took to undo the connection.

Jul 19, 2012 | Cars & Trucks

1 Answer

Can't remove the battery from 2005 honda odyssey


there isn't a "special" tool for this. it is either a 3-8 standard or a 10mm. if it will not grip the bolt then the bolt is "stripped" in which case you need to use a vice grip and taking care not to touch any metal break it loose. then of course replace it with a new one

Nov 22, 2011 | 2005 Honda Odyssey

1 Answer

Replace Oil Filter on 307


Try oil filter tool or use a 80grit sandpaper and turn with all you've got.
A multi grip is handy at times also.

Nov 06, 2011 | Cars & Trucks

1 Answer

2007 passenger folding mirror will not work


{: ) Have someone control the power fold buttons, while you check closely the passenger mirror. If you can feel or hear even a faint hum of the motor while commanded, try giving it a little help, but don't force it if you think it doesn't have enough power to extend or retract itself. The motor could be really stuck or inoperative.
Sometimes when the mirror has been accidentally or manually folded, it needs to be reset by just pressing on the fold buttons a few rounds and let the mirrors fold by itself. Like an exercise.
If you hear the humming noise whenever the fold buttons are pressed, we can assume that the circuit on that side is ok since it is responding electrically, and that a jammed or stuck mechanism is preventing it to move.
If you don't feel or hear any humming, as in totally no sign of response, then there will be additional considerations before deciding to go for a replacement mirror. You will need to confirm if the fault is on the wirings, a door module, or the mirror motor itself. A scan tool test may be recommended for effective diagnosis.
The power fold mirror can be serviced as an assembly. So, goodluck.

Aug 30, 2011 | 2005 GMC Yukon

1 Answer

What tool u need to open oil drain plug because it seems to be square..?


a socket should work, but if not...use an adjustable wrench..make sure it is closed tight so u dont strip the corners..

if all else fails...use some locking vice grip plyers..and again..dont strip those corners..

they should also sell the proper tool at the local auto parts store.

let me know how it goes

Jan 07, 2011 | 2004 Suzuki Forenza

1 Answer

1995 Chev Suburban rear door latch stuck in locked position


sounds like you lached the door
use a screw driver or some such tool
lift the outer handle and slip your tool in the middle of the lock hole in the door flip the lach open wile holding handle up

Dec 31, 2009 | 1999 Dodge Ram

2 Answers

Locked keys in my 95 ford aerostar need to open without keys ..any suggestions


use slim jim. work it close to where you put the key to unluck it.

Nov 14, 2009 | 1995 Ford Aerostar

1 Answer

Disable v-cast key


With the phone closed, hold down the multi-function button on the lower-right side of the phone for a few seconds; that will lock all of the buttons on your phone until you either a) open the phone, or b) hold down the same button for another few seconds to unlock the keys.
To the best of my knowledge, there's no way to set the button to ALWAYS be disabled when closed; you have to lock it every time you close the phone.
NOTE: Locking your keys can create another problem, at least on my phone, where I've disabled the option to anser a call by flipping it open (I prefer the option to view the caller and ignore it if it's not a priority). When I receive a call with the phone locked, I have to wait a few seconds after flipping the phone open before pressing the "answer" key; if I answer too soon after flipping it open, the phone tends to lock up for about 30 seconds, which obviously kills the call.

Apr 07, 2009 | 2007 Toyota Avalon

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

204 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...