Question about 1995 Hyundai Elantra

1 Answer

HYUNDAI ELANTRA J2 CUTS PETROL AND COULD NOT PICK UP ON 2000 REVS

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyundai Master
  • 75,235 Answers

The following are the general instructions on the start of diagnosing any electronically controlled engine or transmission problem.

The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems. Also engine mechanical problems can and do cause many drive-ability related problem such as rough idle and other symptoms.

Posted on Oct 26, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: hyundai elantra 1.6GLS J2 torque settings

dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
mains-30nm +65deg
big ends- 1 - 26nm 2 - 52NM
fly-wheel -130nm
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm

Posted on Sep 23, 2009

  • 80 Answers

SOURCE: need power window diagram for 2000 hyundai elantra

is this what your looking for??
Front Door Glass:
36c72f3.jpg

Posted on Apr 25, 2009

  • 1071 Answers

SOURCE: Please provide torque settings for the head bolts

1st stage 45lbs then 65 then 85

Posted on Aug 21, 2009

ghost45
  • 1280 Answers

SOURCE: Describe your is there a sensor on a 2000 hyundai

YES!... There are many sensors on an automatic transmission which could pose a problem -- depending on what the problem actually is. For example, there are 'input' and 'output' speed sensors, there is a fluid temperature sensor, there is a vehicle speed sensor, and there are several solenoid valves located inside the transmission connected to the valve body. Each and every one of these items can be a problem -- again -- depends on what the problem ACTUALLY is. Agreed?

Posted on Oct 04, 2009

  • 10 Answers

SOURCE: 2000 Hyundai Elantra, Heater Problem.

check the fuses

Posted on Oct 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1.6l J2 dohc. What is the cylinder head torque setting?


stage1: 30-35 NM
stage2: 30-35 NM
stage3: 65*
stage4: 65*
25951941-mksl4fbjm1gpcuiuqmu5zfu2-3-0.jpg

Nov 10, 2015 | 2000 Hyundai Elantra

1 Answer

Hyundai Elantra 1999 GL


run the fault codes to find the sensor that is at fault

Sep 08, 2014 | 2000 Hyundai Elantra

1 Answer

I want to know if the motor on the 1998 elantra is a j1 modle or j2? Where can I look to see what it is?


The engine ID number is above the trans, printed on the block, below the head. There may be a emission decal under the hood showing a J1 or J2, if you call the Hyundai Parts dept with your VIN number they should be able to tell you.

Sep 07, 2011 | 1998 Hyundai Elantra

1 Answer

Can i adjust the timing of my 97 j2 hyundai elantra my self or not. rubenhusselmann@yahoo.com


On the 1997 Hyundai Elantra Ignition Timing is computer controlled. It is non-adjustable.

Dec 29, 2010 | Hyundai Elantra Cars & Trucks

2 Answers

Hyundai elantra 1.6GLS J2 torque settings


dear friend:here follows the settings in need:
cylinder head-30-35 nm + 30-35 + 65deg + 65deg.
mains-30nm +65deg
big ends- 1 - 26nm 2 - 52NM
fly-wheel -130nm
cam-sprocket - 100-120
crank-pulley - 170-180
cam caps -15nm

Aug 31, 2009 | 1995 Hyundai Elantra

1 Answer

Engine high rev at stop and slowly goes to idle speed.


I've got Hyundai Lantra 1.6 year 2000. It's take time to start when it's hot. When I start my car it revs at about 2k-3k rpm. It also does it when I come to a stop. When I come to a stop it will stay at a higher rpm than that of idle speed. It drives ok when on freeway but uses more petrol. I have changed the water & petrol pump but no luck

Oct 26, 2008 | 2000 Hyundai Elantra

1 Answer

Auto gearbox 1998 Hyundai 2000cc


Probably needs a gearbox rebuild. Take it to a specialist or you may waste a lot of money using odd job mechanics.

Apr 27, 2017 | 2000 Hyundai Elantra

2 Answers

Car stalling


check your fuel pump may not be working

Aug 05, 2008 | 1998 Hyundai Elantra

1 Answer

Hyundai elantra j2 model 1995


Most of the Public Libraries have all Hyundai manuals

Jun 13, 2008 | 1995 Hyundai Elantra

Not finding what you are looking for?
1995 Hyundai Elantra Logo

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7782 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...