Question about Cars & Trucks
I think you have a ****** failure, this transmission isn't computer controlled except for overdrive.
Posted on Oct 26, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
check your rear end and make sure it has plenty of gear oil..if full then there is friction in it somewhere and it is probly getting ready to go out.
Posted on Dec 02, 2008
I have the feeling that the cv was replaced with one that didn't have a tone ring (part of the ABS) on it, or the tech neglected to put the sensor back in the knuckle.
Definitely take it back. Good luck!
Posted on Jan 06, 2009
replace the rear output speed sensor, that is what the computer uses to know when to shift the transmission into onverdrive.
Posted on May 10, 2009
Was the sensor an aftermarket one of did you get it from the daler. Aftermarket ones aren't always gapped right. After that check your ABS sensors. I can tell you how if needed. You just need a multi meter.
Posted on Jun 10, 2009
depending on how bad the axels are. you could buy new ones. or you can buy a rebuild kit. now for the leak just 1 seal but if your gonna remove both axels i suggest buyin both side seals.
Posted on Jul 22, 2009
Tips for a great answer:
Oct 29, 2016 | GMC Cars & Trucks
Oct 10, 2016 | Volvo 850 Cars & Trucks
Sep 21, 2013 | 2005 Mazda Tribute
May 05, 2013 | 2007 Chevrolet Trailblazer
Oct 24, 2012 | 1990 Dodge Ram
Jul 03, 2012 | 1995 Dodge Ram 2500
Apr 05, 2010 | 1998 Audi A4
49 people viewed this question
Usually answered in minutes!