Question about 2002 Dodge Intrepid

Open Question

What is fault code p1681 for a 2004 dodge intrepid

My check engine light came on and i got two fault codes p0158 and p1681 how do i fix

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 119 Answers

SOURCE: check engine codes 95 dodge intrepid

Code 12 is: Direct battery input to PCM was disconnected within the last 50 key-on cycles.

Code 21 is: Neither rich nor lean condition detected from the oxygen sensor input or oxygen sensor input voltage maintained above the normal operating range.

Posted on May 23, 2008

Ad
  • 14 Answers

SOURCE: 1998 intrepid check engine light

1484 The catalyst seems to be overheating!
1684 The battery has been disconnected within the last 50 starts.

from what i have researched the 1684 is a common code that these vehicles give out..i even got one when i checked mine and i had never disconnected the battery before..so i wouldn't pay to much attention to that one...now the other code is a different story

Posted on Jul 22, 2008

canbruce75
  • 1776 Answers

SOURCE: 2002 Dodge Intrepid- check engine light came on

This code indicates an automatic transmission control problem. The presence of this code means that the transmission control module or TCM has detected a fault and relayed it to the PCM. It could be a TCM related solenoid has failed or is damaged or the TCM itself could be faulty. Best wishes.

Posted on Aug 18, 2009

bschilz
  • 2049 Answers

SOURCE: I have a 2004 Dodge Intrepid SE and the check

P0700 code is a generic code for Transmission Control System Malfunction


P1776 code means your solenoid switch valve is stuck in low reverse. (DTC 47) A stuck solenoid switch valve is a common occurrence in the valve body of the Dodge 41te transmission.

The first step would be to check the wiring to the solenoid from the TCM, then maybe try a new solenoid pack if the wiring is determined to be fine.

Posted on Jan 06, 2010

  • 120 Answers

SOURCE: code p0340 on 2000 dodge intrepid

it might be the cam shaft sensor it might be the crank shaft sensor the best thing to do is replace them bolth. but it does sound like it may be either one because if one goes out the other will still work but when starting the car it will take longer for it to read from either or the one sensor that is still working because they work together to tell the system to deliver the gas. im pretty positive that it is either the cam or crank shaft sensor

Posted on Jun 21, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

After fixing p0132 p0138 p0152 p0158 I erase codes after light comes back on


make sure you have erased the codes , if you are sure they have been erased , and they come back, the fault has not been fixed.

Apr 03, 2017 | Cars & Trucks

2 Answers

Check engine light on. How do I fix it?


How to fix your check engine light. - Instructables

www.instructables.com/.../How-to-fix-your-check-engine-li...

InstructablesStep 1: Buy an OBD reader. ... OBD stands for on board diagnostic. ... The OBD codes for a leaky gas cap are misleading and this happens a LOT, especially if you've recently gotten gas.

How to fix your "Check Engine" light ' Mobilâ„¢ Motor Oils

https://mobiloil.com/en/article/car.../how-to-fix-your-check-engine-light
Discover the mystery behind your pesky "Check Engine" light coming on before ... youcan likely do the job yourself and avoid that expensive repair shop visit.

Top 10 Check-Engine-Light Car Repairs ' Bankrate.com

www.bankrate.com/.../top-10-check-engine-light-car-repairs-1.a...

BankrateWhen the check-engine light flickers on your dashboard, don't stall. ... If you do not have Auto Zone call one of the other auto parts stores to see if they offer that service.... Catalytic converter is an easy fix; cut it out and replace with straight pipe.

HOW TO RESET CHECK ENGINE LIGHT, FREE EASY WAY ...

? 4:02
https://www.youtube.com/watch?v=H0EksnuQdMs
Jul 23, 2013 - Uploaded by Tampatec
HOW TO RESET CHECK ENGINE LIGHT WITHOUT ON ANY TRUCKS ... Code Reader gives you correct error code readings and can do ... How to reset engine warning light Toyota Corolla VVT-i engine and fix ignition error.

Why Did my Car's Check Engine Light Come On? ' Angies List

www.angieslist.com/.../why-did-my-cars-check-engine-light-...

Angie's ListA check engine light on a car can indicate anything from a loose gas cap to a more

Feb 08, 2016 | Cars & Trucks

1 Answer

All was normal,went for an oil change and when I started my PT the check engine light was on .I checked for the code immediatly, while I was still at the oil change place,and it came up P1681.They had no...


P1681 Metering Oil Pump Malfunction, when the vehicle was started after draining the oil, the oil hadn't worked its way in yet so the code would pop up to notify you that the oil was low,, once reset you should be fine, Have fun, Good Luck

Sep 17, 2011 | Chrysler PT Cruiser Cars & Trucks

1 Answer

Had code p0058 come up, so i replaced the co2 sensor. After a few days engine light came on with code p0158....which appears to be almost the same code. whats causing p0158 if ive already changed the...


This vehicle is equiped with 2 O2 sensors 1 is before the Cat converter and 1 after the Cat converter this code is for the 1 after the Cat converter or the most rear sensor not the first 1 change the farthest one from the engine and your problem should be solved.

Apr 29, 2011 | 2004 Dodge Durango

1 Answer

2001 Cherokee 4.0 6cyl -- P0161 and P0158 codes


If you do not know what the codes are, it is O2 sensor. This means the computer is not reading the right information from the faulty sensor. (there is a set range the sensor is meant to show, if one goes over or under the computer shows check engine). The diagnostic is not too bad, give the car a tune up, plugs, wires etc. and replace the O2 sensor. This normally clears up any problems. Let me know if you need further clarification or help.

Sep 28, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Pressure washed engine now O2 sensor faults


check the bank two O2 sensor connector for water intrusion.

Aug 07, 2009 | 2005 Kia Sedona

1 Answer

Codes on my 03' pt cruiser # p1687, p1681 and p0462


need a new sensor, part costs around 200.00 and three hundred for labour costs, they have to take the car apart for it. Would recommend going to dealership for this reason only..

Mar 17, 2009 | 2003 Chrysler PT Cruiser

1 Answer

08 highlander...VSC & check engine light came on....


Code PO158= Oxygen sensor, bank 2 sensor 2. On a V-6 it will be opposite side of engine from #1 cylinder & after catalytic converter

Feb 05, 2009 | 2008 Toyota Highlander

Not finding what you are looking for?
2002 Dodge Intrepid Logo

Related Topics:

183 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

78257 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...