Question about Cars & Trucks

Open Question

How to enter car radio code- Holden Cruze 2003

I have a code but on display panel is just the word CODE how do I start entering

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 5 Answers

SOURCE: 2001 mitsubsi eclipse enter car radio wrong code 3 times

call 1888mitsu2001, choose option #4, then hit * (star). give the operator the last 8 numbers in your vin and they will provide the radio code for FREE!

DO NOT PAY FOR THE CODE ONLINE OR GO TO THE DEALER (they will also charge you).

- you will also need to provide the serial and part number of your radio (takes about 5 minutes to take apart an eclipse dash...1 screw in the bottom of the HVAC panel) if you call the 1888mitsu2001 it will provide basic instructions on how to accomplish this.

- if your radio says "off" (meaning you entered the wrong code too many times) you need to put your key in the ignition and turn it to ACC mode for approx. 45min - 1hr and then your radio will say "code" at which point you can enter the code to unlock the radio.

Posted on Jul 02, 2009

Ad
  • 17 Answers

SOURCE: Radio Locked Up, due to wrong code entered.....

Leave the radio on for one hour and the radio will reset. Works on all locked Mitsubishi radios. Dont go opening up the radio for no reason....

Posted on Jul 15, 2009

philschneide
  • 448 Answers

SOURCE: how to enter radio code for 2003 honda pilot, have

Try this:

Use the Preset buttons to enter the five-digit code. If it is entered correctly, the radio will start playing.
If you make a mistake entering the code, do not start over or try to
correct your mistake. Complete the five-digit sequence, then enter the
correct code. You have ten tries to enter the correct code. If you are
unsuccessful in ten attempts, you must then leave the system on for
one hour before trying again.

Hope it gets you there.

Posted on Dec 12, 2009

  • 12 Answers

SOURCE: entering radio code

Turn on radio - the word SAFE will appear in the display. Press th P.SCAN and RBDS buttons simultaneously and hold them down until "1000" lights up in the display.Release buttons.Do not, under no circumtances, continue holding them down or press them once again. This will cause the radio to consider the number 1000 to be the input code.Use station buttons 1,2,3,and 4 to enter the code number on your Radio Card. Use the button 1 to enter the first number 2 for the second number 3 for the third number and 4 for the last number.Once you have entered the code and it shows on the display,press the P.SCAN and RBDS buttons down again simultaneously and hold them down until the word SAFE appears in the display.Release buttons. Soon afterwards a frequency will be displayed.

Posted on Jan 04, 2010

  • 4 Answers

SOURCE: radio code for 2003 x type jaguar. I had the

A.MEM, PTY and >> at the same time on x type works , just unlocked mine

Posted on Jan 13, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have the code how do i enter it


1.turn the ignition on to reds .
2.turn the radio on.
3.on the front panel of the radio you will see a button with the lettering asp hold it in until it beeps.
4.then for example if the 1st number of the radio code is 4 ,you will have to press no1 until the 4 appears ,next number use no.2 and so on.
5.once all the number are entered then hold the asp button again until it beeps .
you are now finished the process

Feb 17, 2015 | Holden Astra Cars & Trucks

1 Answer

My 2010holden cruze has an error code 79 what does this mean


Pls what does fault code 79 means on Chevrolet cruze 1.8

Jan 18, 2014 | Holden Cruze Cars & Trucks

2 Answers

Putting in code


When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio.
The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your Holden service centre and get them to enter this code for you.

Dec 24, 2012 | Cars & Trucks

1 Answer

I have a Holden Cruze 2002 and the radio needs a code, though I don't have the log book anymore...! Can anyone help me?!


Security Code Customer Assistance Centre
GM Holden Ltd,
PO Box 1714,
Melbourne, Victoria, 3001 Phone:

NZ:
Fax:
1800 033 349
(03) 9646 5466
0800 465 336
(03) 9647 1237
Hours of Operation:
Monday - Friday 8am - 7pm (EST)
Saturday 9am - 1pm (EST) As your radio and key codes are security information, we cannot provide them to you via written correspondence or telephone.
However these codes can be obtained through any authorised Holden dealership by providing, in person, proof of vehicle ownership and the Vehicle Identification Number (VIN) which is shown on the inside front cover of your Owner's Manual. There may be a nominal charge for this service.

Nov 10, 2012 | Cars & Trucks

1 Answer

My holden cruze has code 79


I done magior service but still code 79 on the display with spinner car sign really frustrd from this car...

Mar 25, 2012 | Holden Cruze Cars & Trucks

1 Answer

I just bought a holden cruze 2002 and the radio need's a code can you lpease help


post radio chassis number then i might be able to generate the code if the numbers are right ,take the radio out to find the chassis number of the radio

Mar 05, 2012 | Cars & Trucks

1 Answer

VT commodoore radio code


When you disconnect your battery and then reconnect itagain, it disables the radio. This is an anti-theft protection for your carradio.
The enable your radio the activation code is in your vehicle owner's manual. Ifyou do not have this code you need to go to your Holden service centre andget them to enter this code for you.

Jan 27, 2012 | 1998 Holden VT Commodore

1 Answer

How to enter radio code for 2003 honda pilot, have code but don't know how to enter it


Try this:

Use the Preset buttons to enter the five-digit code. If it is entered correctly, the radio will start playing.
If you make a mistake entering the code, do not start over or try to
correct your mistake. Complete the five-digit sequence, then enter the
correct code. You have ten tries to enter the correct code. If you are
unsuccessful in ten attempts, you must then leave the system on for
one hour before trying again.

Hope it gets you there.

Dec 12, 2009 | 2003 Honda Pilot

2 Answers

Rds radio Procedure


GM DELCO THEFTLOCK RADIO UNLOCK CODE:
1. Press and hold presets 2 and 3 for about 5 to 10 seconds until you
get 3 digits on your display. This is the first 3 of 6 digits you will
need, so write 'em down.
2. After doing step one and writing down the code, immediately press
the
AM/FM button to get the last 3 of the 6 numbers you'll need, and write
'em down. (if you wait too long between steps 1 and 2 and the LOC code
displays again, just start over).
3. Call this number, it's a prerecorded message, so don't worry about
having to talk to anyone...1-800-537-5140. The voice will ask if
you're
calling for Chevy, Pontiac, Cadillac, etc... When you here him tell
you
to press "2" for Pontiac, press 206010 and hit the # key. He'll ask
you
for the 6 digit code that you've written down. Enter that and press
the
* key. He will then give you a code, and the option to get additional
4
digit codes, but one should be sufficient.
4. Follow the normal procedure in your owners manual for unlocking the
radio with your new code...press the hour set button on your radio
until
you get the first two numbers of the code, then press the minute set
button until you've entered the last two numbers. Immediately press
the
AM/FM button once the correct code is entered and the code SEC or
"secured" will be displayed on the display screen. Now, just turn the
radio on, and your ready to roll.
There is an additional step you can take to remove all codes from the
radio and start from scratch by entering your own personalized 4 digit
code so that it won't get you in a pickle again! Just repeat step 4
and
you should get a display screen that reads ---. This means the code is
out, and you can now program your own code. Of course, once you
receive
the 4 digit code from the GM recorded message, just keep it in a safe
place, because you can use that same code again and again should you
have any more problems with it in the future. Good luck, and yes, it
does work.

Sep 27, 2008 | 2006 Chevrolet Express

1 Answer

Radio code


turn on the key
the radio will say code
just start entering the code via the preset numbers.
When the correct code is entered the radio will switch from displaying code to the normal display.

Jul 15, 2008 | 2004 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

378 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...