Question about 1995 Oldsmobile Cutlass Supreme

1 Answer

Remove install rear strut assembly 1997 chrysler sebring JXi

Posted by on

  • Jeff Harma
    Jeff Harma Oct 27, 2012

    The convertible model Sebring what I drive, summers, some differences to the coupe, rear suspension for 1, are strut form, have changed lower control arms, which are also quite different

  • Jeff Harma
    Jeff Harma Nov 02, 2012

    lower front control arms, I had ordered parts from U.S., I sent ones for the coupe model, difference, anyone need a coupe set?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Oldsmobile Master
  • 75,030 Answers

The rear doesn't have struts just ordinary shock absorbers that you just unbolt and replace, no special skills needs and just a floor jack safety stands and hand tools top replace the shocks is all that is required..

Posted on Oct 26, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you access the rear strut assembly on a 2004 Sebring Convertible? The videos show a trunk access but its not there?Is it located behind the back seat?


its in the trunk area over the wheel. you have to remove the trunk liner panel and then you can access the strut mounting bolts

Feb 17, 2015 | 2004 Chrysler Sebring Convertible

1 Answer

How do I replace my whole ignition assembly on a 2000 Chrysler Sebring jxi


Start by removing the two lower shroud screws and remove the upper and lower steering column cover.
Look along the lower casing of the lock cylinder housing and you will see a small (1/8") hole with a pin in it.
Put the key in the cylinder and turn it to run. While in this position, push the pin into the lock cylinder and pull the key and cylinder out.
To install, turn the new key in the new cylinder to run position and slide it into the housing. To lock it in place, turn the key to the off position.

Oct 25, 2014 | 2000 Chrysler Sebring

1 Answer

My front strut needs replacing.


Most new struts come with diagram you can purchase just the strut or the complete assembly. Recommend complete assembly and replace both sides and have an front end alignment done after installation. If doing your self use caution with compression tool. This tool can also be rented at auto parts store.

Feb 10, 2014 | 2000 Chrysler Sebring

1 Answer

1997 chrysler sebring jxi convertible electric odometer doesnt work


Common problem with those cars. Likely you will have to get the Odometer replaced. Assuming your Speedometer is working?

Mar 05, 2012 | 1997 Chrysler Sebring

1 Answer

My 2.5 V6 in 1997 Sebring Jxi runs rough after I installed a Timing belt. The code is P1391 - Crankshaft or cam shaft Position sensor. How do I fix it?


the timing is off you need to readjust it. most likely the motor is running rough because of inaccurate combustion.

Feb 07, 2011 | 1997 Chrysler Sebring

1 Answer

Replacing headlight in 1996 Chrysler Sebring JXI


piece of cake....
take off the two "star" bolts, one toward the center of the engine above the light assembly and the other toward the fender (it is very long). when you remove them both the entier assembly falls off into your hands and makes changing the bulbs much easier.

Aug 25, 2008 | 1996 Chrysler Sebring

Not finding what you are looking for?

Open Questions:

See all 1995 Oldsmobile Cutlass Supreme Questions

1995 Oldsmobile Cutlass Supreme Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...