Question about 1992 Lexus Es 300
Recently my 1992 lexus es300 has been having problems with starting i replaced the battery and all was well for a couple of weeks for the last 3 mornings though i have to have it jumped so i asked my boyfriend to look at the conections well he while looking inside the driver door panel for shorts hit the lock button on the doors well i went out to get in and the door was locked but the window was half way down on my side so reached in to unlock it manualy and the alarm went off and now the car wont start at all how do i reset it or what do i do thank you theresa
There is nothing you can do to fix this at home, you need the dealer to scan the systems module and see what is going on.
Posted on Oct 26, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: I have a 92 Lexus
Thanks for using FixYa. First of all you’ll need to check battery voltage, recharge it if it is low or jump start with another battery charger. Inspect, clean and tight both ends of all battery cables. Also check, clean and tight wiring connections. Check for voltage at relay. If relay has voltage but there is no "click" when key is turned to start, replace relay. Remove starter and inspect drive gear and flywheel teeth, replace damaged parts if necessary. Check to see if voltage reaches starter relay/solenoid when turn to start. If not, check for open P/N switch and brake or clutch pedal switch. Please pry the interior panel and release the inside door locks. If still the issue is not resolved then you’ll need to drill a two inch hole into the latch to access the inside lock link through the interior panel. After removing the panel replaces the latch to resolve the issue. See the picture where to drill---
Please do accept the solution if the issue is resolved or else revert for further assistance.
Posted on Mar 10, 2010
Okay you may want to check to see if the sensor on door lock cylinder hasn't fallen off from the lock itself. Pull of the door panels and check the wires at the door lock cylinder. Hope this helps.
Posted on Mar 25, 2010
Tips for a great answer:
Apr 24, 2017 | 1992 Lexus Es 300
Dec 29, 2012 | Cars & Trucks
Jun 22, 2011 | 1992 Lexus Es 300
Feb 14, 2011 | 1992 Lexus Es 300
Mar 03, 2010 | 1992 Lexus Es 300
Feb 10, 2010 | Lexus Cars & Trucks
Nov 05, 2009 | 1990 Lexus LS 400
Jul 12, 2009 | 1996 Lexus ES 300
Mar 12, 2009 | 1992 Lexus Ls 400
265 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: