Question about Cars & Trucks

Open Question

1996 ford courier 2.6 ltr fuel pump location

Told to replace fuel pump

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 75 Answers

SOURCE: location of the fuel pump relay or fuse

fuel pump in the fuel tank note that all ford are equipt with cut of suitch (interuptor) located under dach board in case of colision ,towing, ect.....this electrical devise wil stop the flow of the fuel to prevent car fire

Posted on Dec 21, 2008

  • 1596 Answers

SOURCE: need directions on replacing 2000 dodge durange 4.7 ltr fuel pump






WARNING: THE FUEL SYSTEM IS UNDER A CONSTANT PRESSURE (EVEN WITH ENGINE OFF). BEFORE DRAINING FUEL TANK, FUEL SYSTEM PRESSURE MUST BE RELEASED.

Two different procedures may be used to drain fuel tank (removing fuel vent hose at fuel tank or using DRB scan tool).

The quickest draining procedure involves removing fuel vent hose at fuel tank.

As an alternative procedure, the electric fuel pump may be activated allowing tank to be drained at fuel rail connection. Refer to DRB scan tool for fuel pump activation procedures. Before disconnecting fuel line at fuel rail, release fuel pressure. Refer to the Fuel System Pressure Release Procedure in for procedures. Attach end of special test hose tool number 6541, 6539, 6631 or 6923 at fuel rail disconnection (tool number will depend on model and/or engine application). Position opposite end of this hose tool to an approved gasoline draining station. Activate fuel pump and drain tank until empty.

If electric fuel pump is not operating, tank must be drained by removing fuel vent hose. Refer to following procedures.

REMOVAL

  1. Perform Fuel System Pressure Release procedure as described.
  2. Disconnect negative battery cable at battery.
  3. Remove fuel tank filler tube cap.
  4. Raise vehicle on hoist.
  5. If equipped, remove fuel tank skid plate.







Fuel PUMP REMOVAL

WARNING: THE FUEL SYSTEM IS UNDER A CONSTANT PRESSURE (EVEN WITH ENGINE OFF). BEFORE SERVICING FUEL PUMP MODULE, FUEL SYSTEM PRESSURE MUST BE RELEASED.

The fuel pump module is located in top of fuel tank.

  1. Drain fuel tank and remove tank. Refer to Fuel Tank Removal/Installation.
  2. Thoroughly wash and clean area around pump module to prevent contaminants from entering tank.
    1. Part of Fuel Tank Removal Procedure: Disconnect EVAP line at pump module (Fig. 25); disconnect wiring harness connector at pump module; disconnect fuel line from fuel filter fitting.
    2. Rotate fuel filter until its fitting is pointed towards center of pump module.
    3. A metal lockring is used to secure fuel pump module to fuel tank (Fig. 25). Six metal fingers (Fig. 25) are molded into the plastic fuel tank. The fingers are used to retain lockring to fuel tank. A rubber gasket is used as a seal between module and fuel tank.
    4. Before removing lockring, apply a small amount of engine oil to 6 fingers where fingers meet lockring (to act as a lubricant).
    5. Remove (rotate) lockring counterclockwise using a brass or bronze drift punch and a hammer. This must be done while slightly prying back on lock tab (Fig. 25).
    6. Remove lockring and pump module from fuel tank.
    INSTALLATION

    CAUTION: Whenever fuel pump module is serviced, the module gasket must be replaced.

    1. Using a new gasket, position fuel pump module into opening in fuel tank. Be sure rubber gasket remains in place. Rotate pump module assembly until module is positioned as shown in (Fig. 25). This step must be followed to prevent float/float rod from contacting sides of fuel tank.
    2. Before installing lockring, apply a small amount of engine oil to 6 fingers where fingers meet lockring (to act as a lubricant).
    3. Position lockring over top of fuel pump module. Tighten finger tight.
    4. Install (rotate) lockring clockwise using a brass or bronze drift punch and a hammer. Continue rotating lockring until 6 fingers (Fig. 25) drop into 6 finger locks and lock tab (Fig. 25) falls into lockring notch.
    5. Install fuel tank. Refer to Fuel Tank Installation.


Posted on Mar 14, 2009

  • 398 Answers

SOURCE: replacing fuel pump and diagram of ford courier 1999 4x4

usually you can hear the buzz/whine of the fuel pump when you turn the key just before start. dont turn the engine over. if it is the fuel pump it usually wont run. keep me posted.

Posted on Mar 27, 2009

mcgyver468
  • 710 Answers

SOURCE: where is the fuel pump shutoff switch located on a 1996 chevy silverado 1500 located

Should be on the passenger side kickplate below the glovebox and to the right. You may have to remove the plastic panel to access it or look for a small hole in it and feel around for the button

Posted on Apr 23, 2009

c17hydro
  • 2984 Answers

SOURCE: i need a diagram of fuse box for 1996 ford ranger

Not sure if you have a 4 cyl, or a V-6....but you pick which you need....I'll post for both if there is a difference:

cceb8d4.gif
May be to small here.....email me at greg.bernett@mcchord.af.mil

Posted on Jul 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 mazda bravo fuel pump relay location


thanks to all i will take a look dose anyone no what manual i need its a 95 ford courier 4x4 but ive been told that its a badge change by ford and mazdai canrt find any books on courier but thay llok identical ford here in australia wont give me any info on it i gess its the mantallity of people here sad

Aug 14, 2012 | 1988 Mazda B2600 Cab Plus

1 Answer

Ford ranger 1996 4.0L v6 single cab long bed it runs but you have 2 have your foot on the gas it does not stay in idle for more than 5min less than that usually it does not take much gas pedal pressure to...


I would suspect that you have a failing fuel pump, the fuel pump pressure is bleeding off due to a faulty check valve, this causes hard starting esp when cold or after sitting. The fuel pump is located inside the fuel tank, the fuel tank must be removed to replace the fuel pump assembly.

Feb 09, 2012 | 1996 Ford Ranger SuperCab

1 Answer

Where is the fule pump located and how do I get to on a 1996 ford


Hello baas60: My name is Roger andI will help you. The fuel pump on the 1996 Ford Taurus is located in the fuel tank. THe best way to access the pump is from underneath the car. You will need to drop the fuel tank in order to gain access to the pump. this is best done on a hoist. Should you need further help please just ask. Please rate the answer you received. This way I know it was helpful. Thank You for using Fix Ya. Roger

Feb 03, 2010 | 1996 Ford Taurus

1 Answer

Need diagram of how to replace a fuel pump in a 1996 ford telstar,or where is it located


go to google images type in 1996 ford telstar fuel pump diagram. it will should show you how to hook it up and where it located.it should be in your gas tank

Jan 16, 2010 | Ford Laser Cars & Trucks

1 Answer

Where is the fuel pump located on the 2001 Ford F-250 / 7.3 ltr diesel??


The fuel pump is located between and underneath the turbo and fuel fiter housing.on top of your engine.it has a blue fuel line going to the front and a fuelline that goes to the rear of each head.it pretty hard to replace.

Sep 22, 2009 | 2001 Ford F250 Super Duty Super Cab

2 Answers

Replacing fuel pump and diagram of ford courier 1999 4x4


usually you can hear the buzz/whine of the fuel pump when you turn the key just before start. dont turn the engine over. if it is the fuel pump it usually wont run. keep me posted.

Mar 27, 2009 | 1999 Ford Contour

2 Answers

Location of the fuel pump relay or fuse


fuel pump in the fuel tank note that all ford are equipt with cut of suitch (interuptor) located under dach board in case of colision ,towing, ect.....this electrical devise wil stop the flow of the fuel to prevent car fire

Dec 21, 2008 | 1988 Mazda B2600 Cab Plus

1 Answer

Does a ford Escort 1.4ltr petrol have a fuel filter


Hi for anyone who has a ford Escort 1.4 ltr petrol and is unsure where the fuel filter is it is located underneath the rear of the car behind the fuel tank and is held up buy a bracket and one bolt

Jun 14, 2008 | 1997 Ford Escort

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

241 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...