Question about Ford Crown Victoria
I can't seem to find the part. It is really a Lincoln Town Car, but the part is Ford. F4AB-14B118-AA 2
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I will make an assumption here, we know what the root word means. This code was extracted from the computer by? What this is telling you one of 2 things: The Bank 2 oxygen sensor down stream of the catalytic converter (there are 2 converters, one for each bank of cylinders on the 4.6ltr engine) is bad and/or that the Bank 2 catalytic converter is no longer doing the job it was designed to do. Simply, Catalysts wear out. They are good for approx 100,000 miles (as required by Federal Law). Again, I assume that the reason the intake manifold was replaced was because it had a crack in one, or more, of the runners? (part that feeds the head of a manifold). It may have taken a while to find this as being the cause of why the car running incorrectly, maybe rough. This means, that during the time the car was being driven with the problem, the amount of unburned, or not within spec exhaust gases, coming off the side of the engine affected by the intake issue was higher than normal. This out of balance level of exhaust gases were being dumped into the converter on that side of the engine, thus causing the converter to have to run hotter, work harder, or even at the time the gas was being processed through, causing deposits to be formed in the converter, thus shortening it's life span. The Bank 1 side of the engine, apparently, did not have the issue and it's catalytic converter's life was not affected. I hope this makes sense to you.
Posted on Aug 19, 2009
I have the same problem in my 2001 towncar. I removed the switch control panel (without removing the door panel) by prying up from the front of the panel. There's a spring loaded plug under the mirror adjustment. Once you get that pulled up, the whole unit will lift out. Since there's a two year difference in the models - it MAY not work... however, you might not have to remove the whole door panel as you think.
In my case, the wiring was bad.
Posted on Sep 03, 2009
Tips for a great answer:
Jun 18, 2017 | Lincoln Town Car Cars & Trucks
Dec 16, 2015 | Lincoln Cars & Trucks
Apr 18, 2013 | 1999 Lincoln Town Car
Feb 04, 2013 | 1999 Lincoln Town Car
Sep 19, 2011 | 1994 Lincoln Town Car
Jul 29, 2011 | 1999 Lincoln Town Car
Jan 08, 2010 | 1997 Lincoln Town Car
Jun 29, 2009 | 1996 Lincoln Town Car
Jul 15, 2008 | Lincoln Town Car Cars & Trucks
Sep 21, 2017 | Ford Cars & Trucks
146 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: