Question about 2007 Chevrolet Tahoe

1 Answer

Cant get the tail light lense off my 07 tahoe.

I removed the two visible screws.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 7 Answers

Put a rag between the bottom of the tail light and the bumper so you dont scratch your paint. Remove the two screws that are visable and then grab the other side and pull straight out towards you (sometimes a slight **** is required). There are 2 body plugs that are holding it in on the side. The angle makes a difference, and be careful not to scratch the lens or bumper.

Posted on Jan 03, 2009

  • Kenney Williamson Jan 03, 2009

    Instead of using the words "slight j3rk" above which came out "slight ****", perhaps I should have said slight tug.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO YOU CHANGE THE REAR TAIL LIGHTS ON A 1998 CROWN VIC?


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

Jul 05, 2011 | 1998 Ford Crown Victoria

1 Answer

How to change back brake light bulb n/s


Access to the tail light cluster should be through panels in the rear corners of the vehicle. Remove the panel and you can remove the tail light cluster to replace the bulbs. This is the position on most sedans, unless, like on pick-ups, the tail light lenses have screws which allow the lenses to be removed to change the bulbs.

Apr 30, 2011 | Volkswagen Golf Cars & Trucks

2 Answers

I cant seem to find out how to remove the tail light to replace the bulb. what am i missing?


Typically, the entire tail light assembly has to be released from the inside. So you have to remove trim, inside, for access, usually 3 or 4 thumbscrews get released and the whole thing comes out. This set up is much more watertight than the older method of lense removal.

Mar 26, 2011 | 1993 Buick Roadmaster

1 Answer

How do i remove the rear tail light lense?


when you open the rear hatch lookin at the light there should be two screws if not there should be a accses panel behinde the light

Feb 27, 2011 | 2007 Chevrolet Tahoe

1 Answer

How do i change the tail light on a 2004 tahoe


Open rear hatch. Remove two mounting screws at the side corner which mount the tail light assy to the body. The whole tail light assy can now be removed. Twist desired bulb holder counterclock wise to remove, then pull bulb to remove. Reinstall in reverse order.

May 19, 2010 | 2004 Chevrolet Tahoe

2 Answers

I cant figure out how to open the tail light to replace it


open the tailgate- remove the two screws on so that the tail light can slide out. Turn the bulb assemble and remove the bulb. Replace it and slide the lense back in replace the two screws and your done.

Jul 04, 2009 | 2008 Hummer H3

2 Answers

How do you remove tail light assembly to change a bulb on a 2002 Chevrolet Tahoe?


Raise the hatch & there are 2 tail light assemble mount screws...remove screws to remove the entire assembly. Look on the back side & remove the bulb that needs to be relaced

Jun 25, 2009 | 2002 Chevrolet Tahoe

1 Answer

Left turn signal blinks rapidly


look at the tail light assembly, open rear door and you should see a couple of screws, remove them and pull light assembly out, the bulb sockets twist left to remove then replace your bulb, reinstall aand check.

Apr 07, 2009 | 1999 Chevrolet Tahoe

1 Answer

Need help taking the tail light cover off a 07 tahoe to change blinker bulb. I got the two visible screws off but it wont come off. I dont want to break it. Thanks for any help......


take two screws out agian and pull harder on edge opposate screws come staright out towards you it has plastic caps holding they will reslease.

Jan 03, 2009 | Chevrolet Tahoe Cars & Trucks

2 Answers

1996 Dodge Ram 1500 Tail lights


There should be two screws on the inside edge of the assembly, one next to top lense and one next to bottom lense. This removes entire assembly not just cover. these are sealed units.

Oct 09, 2008 | 1996 Dodge Ram 1500 Club Cab

Not finding what you are looking for?
2007 Chevrolet Tahoe Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...