Question about Chevrolet Tahoe

1 Answer

Need help taking the tail light cover off a 07 tahoe to change blinker bulb. I got the two visible screws off but it wont come off. I dont want to break it. Thanks for any help......

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

Take two screws out agian and pull harder on edge opposate screws come staright out towards you it has plastic caps holding they will reslease.

Posted on Jan 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

98 Chevy Tahoe, drivers side rear tail light assembly wont work, brake / turn signal. Replaced entire assembly, it worked for about 3 days then stopped working again. I need to get this fixed before I get...


I've got the same problem on 98 GMC Sierra.

I'm an electrical engineer, I checked the electrical diagrams and verified that there is no problem in the rear lamp assembly or wiring. With the light assembly unplugged, I can actually watch the blinker and brake signals operate with a voltmeter. The Tail light works OK.

It simply won't provide enough current to light the bulbs.

I'm afraid that it's melted one of a pair of normally closed contacts inside the blinker switch that feed the brake and turn separately on each side.

Sep 04, 2011 | 1998 Chevrolet Tahoe

1 Answer

How do i change the tail light on a 2004 tahoe


Open rear hatch. Remove two mounting screws at the side corner which mount the tail light assy to the body. The whole tail light assy can now be removed. Twist desired bulb holder counterclock wise to remove, then pull bulb to remove. Reinstall in reverse order.

May 19, 2010 | 2004 Chevrolet Tahoe

1 Answer

How can i remove tail light assembly to change my bulb.in my Chevy Tahoe 2006.


2 screw, they are torx head, so you will need a torx driver, any parts store will have them to sell. remove the 2 screws and while pulling back, take your hand from the side and whack the light lens towards the middle of the truck, this will dislodge the clips.

Oct 20, 2009 | 2002 Chevrolet Tahoe

2 Answers

How do you remove tail light assembly to change a bulb on a 2002 Chevrolet Tahoe?


Raise the hatch & there are 2 tail light assemble mount screws...remove screws to remove the entire assembly. Look on the back side & remove the bulb that needs to be relaced

Jun 25, 2009 | 2002 Chevrolet Tahoe

1 Answer

Replacing tail light on Jeep Liberty


So you already have the screws out. You simply have to pull it out. It probably have a small plug or *** on the back side to help hold it in place. YOu can pull the unit fairly hard on it with out breaking it, just be firm with it and it should come right out. I'm not sure about the 3rd light, how it is mounted as well. Are you just changing the light bulb in it or changing the cover? If your just changing the bulb or cover you should just be able to take the screws out of the cover and use a small screwdriver to gnetly pry it off.

Apr 28, 2009 | Jeep Liberty Cars & Trucks

1 Answer

Need to find out how to replace blinker light on 97 Dodge Ram


Put your tailgate down and take the screws off on the inside of the taillight. The screws are Torx screws, so you will need Torx head screw driver. Then just give it a tug and the cover will pop right off. You will be able to change out the bulb.

Jan 10, 2009 | 1997 Dodge Ram 1500 Club Cab

2 Answers

Rear blinker light change 2001 ram1500


Hello
Welcome to FY
open the tale gate look at the side where the light is there is 2 screw that hold the light to the box
RD

Jan 10, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

Cant get the tail light lense off my 07 tahoe.


Put a rag between the bottom of the tail light and the bumper so you dont scratch your paint. Remove the two screws that are visable and then grab the other side and pull straight out towards you (sometimes a slight **** is required). There are 2 body plugs that are holding it in on the side. The angle makes a difference, and be careful not to scratch the lens or bumper.

Jan 03, 2009 | 2007 Chevrolet Tahoe

2 Answers

Replacing the tail lights of our 2005 Nissan Murano?


Here's a great how to video that will also show you what you need to do to change them.


Nov 21, 2008 | 2005 Nissan Murano

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...