Question about Chevrolet Blazer
Will not start, security light on
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the way that i was told how to do a quick fix for is to hold the key in the electrical start and the actual start up of the engine and hold it there tell the security light is solid and then turn off the truck then bring it back to that point and let it blink until it turns off then you can start the truck.
Posted on Sep 24, 2008
I have a 2001 Impala. My security light will flash and sometimes the car won't start. My dad told me turn the key to the start position, place your foot on the break, put your car in the last gear it was in (D, R, or N). Then shift all the way back into park. Make sure you shift all the way into park. Take your foot off the break. Then turn ignition back to off. Your car should then start right up. He said the sensor still thinks the car is in D, R, or N although it's in park. So it confuses the system and it doesn't start because it doesn't know which function to do. It pretty much locks up. I'm pos. this will work. My car does it every few months. Hope this helps.
Posted on Oct 05, 2009
Since the 2000 chevy blazer is equipped with SRS (Saftey Restraint System), ie: Airbags, which is located in the steering wheel. In order to replace the turn signal switch you must remove the steering wheel. Therefore I would only highly advise you to take it to a dealer to have this done.
Posted on Oct 07, 2009
There isnt any way to disable it that I know of, if you could, anybody could steal the car. It just needs to be fixed by a qualified repair shop or the dealer.
Posted on Nov 23, 2009
Start with the simple and replace the gas cap, and see if the check engine light goes out after a day or so. Post me back the DTC codes just to make sure it's not the EVAP purge valve on the intake manifold by the ignition coil.
Thank you for using fixya and good luck
Posted on Jun 03, 2010
Testimonial: "I replaced the gas cap and it seem's to have worked"
Tips for a great answer:
Nov 14, 2016 | 2001 Chevrolet Blazer
Feb 08, 2014 | Chevrolet Blazer Cars & Trucks
Feb 13, 2013 | 2000 Chevrolet Blazer
Feb 14, 2012 | 2000 Chevrolet Blazer
Dec 27, 2010 | 2000 Chevrolet Blazer
Dec 08, 2010 | 2000 Chevrolet Blazer
Jun 09, 2009 | 1996 Chevrolet Blazer
340 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: