Question about Hyundai Motor 2003 Elantra
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: interference engine
all of the engines used in the hyundai's are interference engine's, that does not mean for sure u have bent valves but the chances are u did. source of info Gates timing belt Catalog.
Posted on Mar 20, 2009
SOURCE: im replacing timing belt, accessory belts and water pump on my hyundai elantra gls 1997 sta wgn auto transmission. (1)Where is bolt to drain engine block coolant?(2)After removing front engine mountin
(1) No need to know if engine block coolant drain plug was available. Once the water pump was removed, all engine block coolant was drained. (2) After removing the three engine mounting bracket bolts, I also removed the mount bracket from the the body and made enough room to replace the timing belt easier.
Posted on May 20, 2009
Just the belt if that is all you need. I would replace all the other belts as well. The Water pump pully has to come offYou can visual the pump better at that time. The easiest way to get the pully back on and off is to remove the Power steering resevoir and transaxell mount in fron middle. Jack the engine up as high as you can get it. Put a block under the pan when jacking to spread the push force. this will tilt it back and up so the pulley will stay ion the water pump nub. It is a two piece pully.
Posted on Jul 07, 2009
SOURCE: 2003 Hyundai Elantra
NO. These models do not have warnings on the transmission failure. There is warnings only when the transmission encounters electrical component failure, overheating(some cars), low fluid. Usually the warning is the O/D flashing light, or a seperate transmission light. Hopefully this helps
Posted on Jul 21, 2009
Did you use a aftermarket O2 sensor or a genuine Hyundai one? If it's an aftermarket one it may be bad or not as good as the OEM one. See here for more details and other potential causes: P0133
Posted on Feb 11, 2010
Tips for a great answer:
May 05, 2015 | Hyundai Cars & Trucks
Oct 15, 2014 | 2005 Hyundai Terracan 3.5
Sep 17, 2014 | 2001 Hyundai Elantra
May 20, 2014 | 2009 Hyundai Elantra
Aug 14, 2011 | Hyundai Motor 2002 Elantra
Apr 30, 2011 | 2003 Kia Sorento
206 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: