Question about 1993 Toyota Corolla

1 Answer

I need to know if my 1993 toyota corolla is a 4 or 6 cylinder . where do i find this inormation on my vehicle?

Need a free vehicle manuel . where could i download it from?

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 108 Answers

Pop the hood, look for the spark plug wires, count em. since that is a front wheel drive, the V shape of the engine will be a front/back setup rather than a side to side so there will either be 2 on the front and 2 on the back or 3 on the front and 3 on the back. it should be very simple to locate as the wires typically run overtop of everything in the engine compartment. the wires usually come in blue, yellow, red, grey, or black and are about 1/4" in diameter and run into the front of the engine in your particular vehicals engine.

Posted on Oct 27, 2012

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1861 Answers

SOURCE: need gapping info for toyota corolla AE-91 1.5l japanese domestic

The correct spark plug gap for the 1.5 litre engine is .032"

Posted on Nov 11, 2008

Mustgo
  • 2359 Answers

SOURCE: i need to know where the egr valve is located

EGR stands for EXHAUST GAS RECIRCULATION.

This is a loop back system between your exhaust manifold and the underside of your filter.

The EGR valve is located between the inlet (exhaust manifold) and the outlet (intake manifold).


About 8-12" below the air filter....toward the passenger side.


EGR carbon built up can be clean.

Check the soft membrane on the EGR valve and see is it crack/torn. If it's in good shape then you may reuse it.

The professional use a vacuum hand tool to determine the travel of the EGR.

There are carbon built up inside the EGR air passage tube too,


Make sure you give both a good cleaning.


The EGR base gasket MUST BE REPLACE!


Order one before you start the job.


Please post more info on the comment window.

Posted on Aug 31, 2009

  • 1810 Answers

SOURCE: where to download free owners manual for 1993

salvage yard is best bet
5 - 10 bucks

Posted on Jan 23, 2010

manuelleiva
  • 97 Answers

SOURCE: where is fuel reset button on 1993 toyota corolla wagon

i am pretty sure that this type of car does not have a reset button for the fuel.i have the same toyota,but mines is a sedan and i have never seen one on it.if your not getting any fuel,check your fuses,if good,check your fuel pump which is located right under your rear seat.hope this info helps.good luck and take care, manny

Posted on Jun 19, 2010

Pelukes01
  • 52 Answers

SOURCE: what are the cylinder head torque settings for a

0900c1528006efe6.jpgUmiformilly tighten each of the ten head bolts in several passes, in the sequence shown. Tighten them to 44 ft. lbs. (60 Nm).

Posted on Jul 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

WERE IS THE FUSABLE LINK IN 1993 COROLLA?


I found this useful diagram at troubleshoot vehicle.com. It answers your question. Fuse box is located below steering column.
Driver Side Fuse Panel
(1993-1996 Toyota Corolla) December 21, 2013 Updated: December 21, 2013 Written by: Abraham Torres-Arredondo driver-side-fuse-box.gifIn the table below you'll find the fuse location and description of the fuses of the driver side under-dash fuse box on 1.6L and 1.8L 1993-1996 Toyota Corolla.
The fuse box is located on the driver side of the dash, below the steering column.
1993-1996 Toyota Corolla Driver Side Fuse Box Fuse Fuse Name Amps 1 Cigarette Lighter, Digital Clock, A/C System, A/T Shift Lock, Alarm, SRS Airbags 20 2 Tail, Parking & License Lights, Instrument Panel and Daytime Running Lights 15 3 Fuel Injection, Cooling Fans, Battery Discharge Light 10 4 Cruise Control System, Daytime Running Lights 10 5 Fuel Injection System 7.5 6 Stop Lights, Cruise Control, Shift Lock System, Anti-Lock Brake (ABS) System 15 7 Turn Signals, Emergency Flashers 10 8 Starting System, Anti-Lock Brake (ABS) System, Shift Lock System 15 9 Gauges, Reminder Lights, Back-up Lights, A/C System, Daytime Running Lights 10 10 Front and Rear Wiper/Washer System 20 driver-side-fuse-box.gif

Jul 06, 2014 | 1993 Toyota Corolla

1 Answer

I need the torque settings for toyota corola 1993 cylinder head torque please ?


Hi Manuel, There are a number of different engines used in the Corolla, knowing which would be a great help. The engines used in the 1993 are of the 'A' series and 'E' series. The torque for the A series is 29 nm + 90 degrees. When removing the head begin loosening from the outer bolts. When the head is off have it inspected for warpage and skimmed if it is required. Tightening any cylinder head always begins at the middle or centre and works outwards. As my friend has said, the camshaft caps are tightened to 9 nm and the inlet manifold goes to 24 nm, and the exhaust is 27 nm. The tappet cover I think is 29 nm. The tappet cover is tightened on the A series with nuts onto the plug tubes. Regards John

Mar 29, 2014 | 1993 Toyota Corolla

1 Answer

Im looking for a 1993 toyota corolla free manuel to download. where can i get one?


check your owners manual. should tell you. the manual youd get from someone might not be the same for your car as they have different options so you could get one for a 6 cyl while you have a 4, or vice versa. also i just posted on a different version of your question of how to check this by looking at spark plug wires under the hood.

Oct 26, 2012 | 1993 Toyota Corolla

1 Answer

Which is cylinder number one in 1993 corolla with 1.6 engine


the one closest to the timing cover and drive belts or the passengers side of car.......i hope that this was the info that you needed and if you need more info let me know.....if you could let me and fixya know if i was able to answer your question and a thumbs up and a comment on how i did would be appreciated....thanks and have a blessed day......

Aug 19, 2011 | 1993 Toyota Corolla

4 Answers

I have a 2000 toyota corolla and the key will only turn to acc. We have tried the other key. The stering wheel is unlocked. We have jiggled the shifter to make sure it is in park.


See if you turn the wheel and try to turn the key at the same time if it releases. We might get a free spot where the key should turn. The lock may be in a bind and pressure on it may release it.
Clean and lubricate the lock cylinder. Electric cleaner to flush the dirt and liquid graphite to lubricate. A substitute for the electric cleaner is a spray of isoprophyl alcohol.
You may also need to tap the assembly for the ignition switch to release the mechanical parts. See if you can get the cover of the steering column off to gain access to the ignition switch assembly.
Check also if the spare does the same, other wise the key may have deformed.

May 02, 2011 | Toyota Corolla Cars & Trucks

1 Answer

1990 TOYOTA COROLLA 1.6 FIRING ORDER


For the 1990 Toyota Corolla 1.6L In-Line 4-Cylinder:

Firing Order:
1-3-4-2
Cylinders:
.......(back).......
|...4...3...2...1...|
.......(front)
Distributor:
..(back)
1........3
.....o....
2........4
..(front)
Rotation: Clockwise

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 19, 2010 | 1990 Toyota Corolla

1 Answer

Set the timming from a motor 4af toyota corolla


Click on the following direct, free Link. It has the Timing Belt + Mark Diagrams for your 1991 Toyota Corolla 1.6L DOHC In-Line 4-Cylinder (4A-FE) Engine. Is also has additional - very helpful Instructional and Directional Diagrams.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/1991/make/toyota/model/corolla/1991_toyota_corolla_timing_belt_diagram_marks.htm

Apr 11, 2010 | 1991 Toyota Corolla

1 Answer

Diagram to install alternator belt on 1993 toyota pick up truck


Click on the following free direct Link. It has the correct Serpentine and Drive Belt Diagrams for your 1993 Toyota Pickup, with either the 2.4L SOHC In-Line 4-Cylinder, 2.7L DOHC In-Line 4-Cylinder, or 3.0L SOHC V6 Engine with the different Engine Options (AC/No AC etc.).

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1993/make/toyota/model/pickup/1993_toyota_pickup_drive_belt_routing_diagram.htm

Mar 29, 2010 | 1993 Toyota Pickup

1 Answer

1993 oldsmobile cutlass ciera 3.3 liter need firing order and coil pack diagram ?


For the 3.3L (6-cylinders):
Firing Order:
1-6-5-4-3-2
Cylinders
2------4------6
1------3------5
(Front of Vehicle)
Ignition Connectors:
___
o-1
o-4
___
o-5
o-2
___
o-3
o-6
(Front of Vehicle)


Let me know if this helped, or if you have additional information or questions. Feel free to contact me at FixYa.com!

Feb 20, 2010 | 1993 Oldsmobile Cutlass Ciera

1 Answer

I need the correct firing order 1993 lumina apv with a 3.1


For the 3.1L
Firing Order:
1-2-3-4-5-6
Cylinders:
(Back of Vehicle)
1------3------5
2------4------6
(Front of Vehicle)
Distributor:
....+....2
1...........3
.6..........4
.....5....+-screw
(front of vehicle)

For the 3.8L:
Firing Order:
1-6-5-4-3-2
Cylinders:
(Back of Vehicle)
2-------4-------6
1-------3-------5
(Front of Vehicle)
Ignition Connections:
o <-----6

o <-----3
o <-----2

o <-----5
o <-----4

o <-----1
(front of vehicle)

Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!

Dec 19, 2009 | 1993 Chevrolet Lumina APV

Not finding what you are looking for?
1993 Toyota Corolla Logo

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...