Question about 2006 Pontiac Montana SV6
Should reset by it self everytime u turn the key off if it still coming on u still have a problem
Posted on Oct 26, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i had the same problem on my 2000 montana, used a scanner to check for abs code and found right front sensor throwing code, checked sensor and found ok, checked harness from sensor to connection under hood and found wiring circut at the plastic clip where harness hooks to sensor was bad, replaced harness from connector to sensor and problem went away
Posted on Jun 17, 2009
If the 2005 Montana is similar to the 2001 Montana, I have a solution. First you'll need a hexagonal wrench (the 6-sided L-shaped wrench). The tail light assembly is held on by two screws. You'll need the hexagonal wrench to remove them, because a normal screwdriver won't do it. I also had to use a conventional adjustable wrench to get the leverage to turn the hexagonal wrench, because the screws were in there pretty tight. Once you remove the two screws, the whole tail light assembly should come off. Mine required a little force and I had to play with it a bit, but it came off without a lot of work. There will be one set of wires that connects the tail light assembly to the rest of the minivan--try not to damage that set of wires. Once you get the tail light assembly off, you'll have to take apart the assembly that actually holds the lights. No tools should be required. It's held on by four plastic catches. Just undo the catches (easier said than done, but still not too tough) and it comes apart. Then you can pop out the old light and pop in the new light. Then re-assemble. For me, it went back together much easier than it came apart.
Posted on Jan 03, 2009
For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.
Posted on Feb 14, 2009
Tips for a great answer:
Mar 18, 2014 | 2006 Pontiac Montana SV6
Mar 02, 2013 | 2006 Pontiac Montana SV6
May 07, 2011 | 2005 Pontiac Montana SV6
Feb 21, 2011 | 2005 Pontiac Montana SV6
Nov 07, 2010 | 2005 Pontiac Montana SV6
Dec 10, 2009 | 2005 Pontiac Montana SV6
Sep 07, 2009 | 2006 Pontiac Montana SV6
Mar 30, 2009 | 2005 Pontiac Montana SV6
445 people viewed this question
Usually answered in minutes!