Question about 1992 Buick Park Avenue
Hi Julie,your light switch is bad,need a new one.http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?pageId=0900c1528004a9df Here's the part.http://www.autozone.com/autozone/parts/1992-Buick-Park-Avenue/Headlight-Switch/_/N-iwix5Z9ciaj
Posted on Oct 26, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Remove or Disconnect
Door handle trim plate.
Remove or Disconnect
Posted on Mar 14, 2009
you may have to replace the ball bearings. in an abs ball bearing assembly there is an electronic plug in that goes bad
Posted on Jun 21, 2009
BCM --The Body Control Module is located on the right side of the vehicle and positioned under the instrument panel. In order to gain access to the module, it will be necessary to first remove the trim panel.
Posted on Jun 23, 2009
there is a pic under the hood that showes the corect way to run the belt. over and under diferant pulleys. figure out the corect way it goes and use a breaker bar to pull the tenchenor so you can slide the belt on, then let go slow and your done. the soring holds the pulley at the exact right tension. you can do this it's not that hard... good luck
Posted on Jul 09, 2009
The code PO742 indicates the torque converter clutch is stuck on.
The torque converter is what connects the engine to the transmission.
It engages and disengages according to signals from the pcm, to aid in
smooth shifting. There are a couple of things you can try. make sure trans. fluid is full, if thats ok check the 20 pin connector, located on left
side of car on top of transmission bell housing. Make sure there's no
corrosion or bent pins. If this clears the code your all set, if not you may
want to ask your mechanic and see what he/she recomends.
Hope this helps.
Posted on Jan 19, 2010
Tips for a great answer:
Nov 28, 2014 | 2000 Buick Park Avenue
Oct 31, 2014 | 1995 Buick Park Avenue
Nov 24, 2013 | 1993 Buick Park Avenue
Jul 28, 2013 | Cars & Trucks
Jul 10, 2012 | 2000 Buick Park Avenue
May 15, 2012 | 2000 Buick Park Avenue
May 17, 2010 | 1998 Buick Park Avenue
Apr 16, 2010 | 1994 Buick Park Avenue
Jul 09, 2009 | 2000 Buick Park Avenue
205 people viewed this question
Usually answered in minutes!