Question about Cars & Trucks
Bad headlight switch,what year,make.model and engine size,maybe I can send you a repair guide on how to replace.
Posted on Oct 26, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
ya its is prolly the bulbs, open your hood. look behind your headlamps, some have covers for the low beam and high beam. if there are covers turn on your high beams so you will know which bulb is your lowbeam. if you can unplug them. after cover is removed and you can acces the bulbs. they either twist out, lefty lossey. or they have little metal retainers that you have to move a certian way before you can swing the retainer out. its like a door you just have to unhook the proper side of retainer and the other side will be hinged. use a flash light and look at it close. good luck
Posted on Jan 29, 2009
In Audi models with with light switch on the stalk with the wiper switch and turn signal switch this is a common problem. The switch is bad and needs to be replaced, you have to replace the complete assembly with the turn signal and wiper stalk
Posted on Mar 21, 2009
chapmnfarm: your head lights use a "2" fuse system.
one for the left and one for the right.
The fuse box you are looking for is under the hood on the passenger's side. It is a black box roughly 8 inches long and 4-5 inches wide. When you remove the cover, you will see fuses and relays. What you are looking for is the section in the box which has a cluster of 7 fuses. 3 in one row and 4 in the other. On the outer parameter are two relays. The fuses you are interested in are located in the row of 4 fuses, with the two closest to the "L" shaped part of the box. Both of those should be 15 amp fuses.
The fuse below those should be a 20 amp which is the lighting switch and the one below it is a 15 amp which is for the interior lights and the clock.
Check your harness grounds in the engine compartment near the area you have the problem. There are ground wires which come out of the harness on both sides of the core support. The wires are black in color and have "EYES" crimped onto the ends of the wires. Both of them will probably be located about 4-6 inches below the upper tie bar on each side of the radiator. Odds are that the eyes will be large enough to pass a 6mm bolt through.
I hope what I have given you will resolve your problem. Lem me know,,good luck>>>>>>>>>>>>>>>
Posted on Apr 19, 2009
At first 1994 C280 high beams began to not connect regularly when stick pushed forward, then not at all. Drove high beams by pulling and holding stick back towards steering wheel until that stopped working, too. Shop said the turn signal switch was at fault-- had seen it many times before with W202; about $160 to replace. Haven't done it yet, but should be an easy fix?
Posted on Jun 24, 2009
Tips for a great answer:
Dec 15, 2011 | 2006 Buick LaCrosse
Jul 21, 2010 | 1993 Ford Escort 4 Door
Feb 23, 2010 | 1990 Mitsubishi Galant
Nov 07, 2009 | 1998 Ford Escort
Jun 05, 2017 | 2004 GMC Envoy
Aug 23, 2009 | 1996 Hyundai Accent
Aug 04, 2009 | 2000 Chevrolet Silverado
Jan 04, 2009 | 2001 Oldsmobile Alero
56 people viewed this question
Usually answered in minutes!