Question about 1998 GMC Safari
When the wipers are turned to off, the wipers will continue to stay on for a minute or two before shutting off.
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
i went under for driver side then i took off passenger side wheel you also have to remove two bolts that are holding dipstick tube in place it is easy to get them from the wheel well on passenger
Posted on Nov 17, 2008
SOURCE: how to change the sparks
take your tires off the front one side at a time and remove your splash skirt,you can change 2 from there and the other one by removing your cowoling from inside the van.
Posted on Apr 20, 2009
Replace the multifunction switch where the wiper switch and turn signal are located on the steering wheel. There are two screws that hold it on and you can remove the cover on the steering wheel with a tork wrench #6 I think, could be next size down #4 then remove the two screws holding the switch in place. And disconnect the wiring Replace the multifunction switch where the wiper switch and turn signal are located on the steering wheel. There are two screws that hold it on and you can remove the cover on the steering wheel with a tork wrench #6 I think, could be next size down #4 then remove the two screws holding the switch in place. And disconnect the wiring connector and replace. connector and replace. If you need more help post here and Thanks for using Fix-ya.
Posted on Aug 23, 2009
the best way is to do it through the wheel wells ,remove the tires and you should be able do see all the plugs,youmight have to lift up on the rubber dirt shield.
Posted on Feb 01, 2010
May want to look at replacing the wiper circuit board.It is located on the firewall adjacent to the wiper motor and has a some what square black cover with 3 torx screws and wireing harness pluged into the side.We had a truck that every time you washed it the wipers would stay on until it dryed out.You can try removing it and spaying it down with contact cleaner just watch the brease on the two contact tips.Well hope this helps.
Posted on Feb 05, 2010
Tips for a great answer:
Mar 10, 2015 | 1999 GMC Safari
Mar 23, 2011 | GMC Safari Cars & Trucks
Jan 03, 2011 | 2003 GMC Safari
Sep 15, 2010 | 1999 GMC Safari
Jul 04, 2010 | 1998 GMC Safari
Mar 05, 2010 | 1998 GMC Safari
Jan 24, 2009 | 1998 Chevrolet Venture Cargo
Oct 09, 2008 | 1994 GMC Sonoma
86 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: