Question about 2005 Pontiac Vibe

Open Question

Removing headlight on pontiac vibe

How to remove headlight

Posted by on

6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: pontiac vibe headlights come on when its cold

Remove the fuse labeled ECU-B from the fuse panel inside the vehicle. The instrument panel fuse block is located underneath the instrument panel on the driver's side of the car. This will disable to Daytime Running Lights. These have been known to come on at odd times during cold weather and thus drain the battery. Disconnect the battery and have it fully charged using a battery charger that you plug in to your homes electric supply, or replace the battery with a new one. This should keep the Daytime Runners from coming on and draining your battery when the car is not on. Once you have done this you can then take the vehicle to a service location and have the issue taken care of. This is only a band-aid so you can limp through until you can get it fixed. This is not a permenant solution.

Posted on Jan 17, 2009

  • 4044 Answers

SOURCE: Install timing belt Pontiac Vibe

The best Diagram I can offer you is from the Haynes repair manual for your vehicle. You can get one from your local auto parts store. In most cases you will need an "allen wrench" to insert in the center of the tensioner pulley and then use a box end wrench to get enough torque to move it and allow you to remove and install a new belt.

Posted on Oct 13, 2009

Testimonial: "I went to Advanced, called NAPA & Auto Zone... none of them had the Haynes manual I needed... did get it, just needed and extra set of hands. Thanks!"

  • 540 Answers

SOURCE: 2004 Pontiac Vibe 12V electrical outlet (cigarette

You can look inside the socket and see two grooves in it. You need to remove the fuse, and then reach inside with two small flat head screw drivers at the same time and push the tabs out while pulling on the socket. This is not easy to do, and I would suggest taking to a dealer for removal due to they have a special tool that clicks into place and pulls it out easily.

Posted on Jan 18, 2010

  • 1 Answer

SOURCE: Headlights on '09 Pontiac Vibe?


Posted on Feb 10, 2010

  • 233 Answers

SOURCE: How do you remove the front brake rotor on a 2005

To remove the brake rotor, you must first remove the brake pads and caliper. There are two bolts that hold the brake caliper in place. Remove the two bolts and tie the caliper up out of the way. Be careful not to break the brake line connected to the back of caliper. Once the caliper is removed, simply slide the rotor off. To install a new rotor, simply slide rotor over studs and replace the caliper with new brake pads. It is as simple as that.

Posted on Jun 16, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why would the low beam headlights stop working in a 2005 Pontiac Vibe?

They are controlled by the turn signal switch. Replace that.

Aug 09, 2014 | 2005 Pontiac Vibe

1 Answer

Pontiac vibe headlight socket wiring

black wire ground.need to let GM tech fix. you need electrical can go online internet look for online repair manual look up electrical wiring diagram for 2005 pontiac vibe online manual may charge you a little just for month use or one year use.

Apr 04, 2013 | 2005 Pontiac Vibe

2 Answers

How to change water pump on Pontiac Vibe 2003

Remove the water pump assembly to the timing chain housing bolts (2).

2. Remove the water pump.

3. Remove the water pump O-ring.


The drive belt tensioner must be unloaded and the drive belt removed

before the water pump is removed.

Page 1 of 1

Jul 25, 2012 | 2003 Pontiac Vibe

1 Answer

2005 Pontiac vibe suddenly didn't turn on this morning wont turn on the dash board lights will turn on but not the headlight what could it be?

you have several relays in this system also the system is fused. check fuse first check connections secondly

Jun 27, 2012 | Pontiac Vibe Cars & Trucks

1 Answer

Need to replace the headlight assembly on front passenger side do i have to take off the bumper? for ponitac vibe 2003 also have dent on the area

Yes you do. This is the steps to do that to replace the entire headlight assembly:

Remove the front fascia.
  • Remove the front fascia extensions, if equipped.
  • Remove the front fender liners.
  • Remove the fog lamps.
  • Remove the bolts (4) from the front bumper fascia (3) at the fender.


Remove the bolts from the front bumper fascia at the fender

  • Remove the push-in retainers (2) from the bumper fascia using J38778.
  • Remove the fascia bolts (1) from the fascia.
  • Remove the fascia from the vehicle.
  • Remove the 3 bolts which secure the composite headlamp.

  • 7f1ec16.gif

    Remove the 3 bolts which secure the composite headlamp

    1. Remove the sidemarker bulb electrical connector.
    2. Remove the sidemarker bulb, if necessary.
    3. Remove the composite headlamp assembly from vehicle.

    To install:

    1. Install the sidemarker bulb to the composite headlamp, if removed.
    2. Connect the sidemarker bulb electrical connector.
    3. Secure the composite headlamp to the vehicle with the 3 bolts. Tighten the headlamp mounting bolts to 89 inch lbs. (10 Nm).
    4. Install the front fascia.
    5. Install the headlamp bulb to the composite headlamp, if removed.
    6. Fasten the headlamp bulb retainer clip.
    7. Install the socket to the headlamp bulb.
    8. Install the rubber cover to the composite headlamp.
    9. Aim the headlamps.
    10. Close the hood.

    Oct 12, 2010 | 2003 Pontiac Vibe

    1 Answer

    Headlights on '09 Pontiac Vibe?


    Dec 22, 2009 | 2009 Pontiac Vibe

    1 Answer

    Replacing rotors on a 2003 pontiac vibe

    Remove the caliper and caliper anchor and the rotor pulls off. Sometimes you need to us a hammer on the inside because of rust if you live in the rust belt. I own a 2004 Vibe so I've been there.

    Feb 14, 2009 | 2003 Pontiac Vibe

    Not finding what you are looking for?
    2005 Pontiac Vibe Logo

    Related Topics:

    137 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Pontiac Experts


    Level 3 Expert

    75197 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7782 Answers

    Are you a Pontiac Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides