Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Our 2002 did the same thing. Easy cheap fix! Pull the wheel off and check the wiring that goes to the wheel sensor. You will find after removing a few inches of wrap, a broken wire or two. This could be on either wheel, so check both. Fix the wires back up and you are good to go. Hope this helps!
Posted on Aug 01, 2008
I cannot find the 2004, but you can buy it from the dealer. You can download the 2003 and 2005 from this link. http://www.extendedgmwarranty.com/owners-manual/buick_owner_manuals.html
Posted on May 22, 2009
Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three time in five seconds. If the CHANGE OIL SOON’ indicator flashes two times, the system is resetting. Turn the key to OFF, then start the vehicle. If the CHANGE OIL SOON indicator comes on and stays on for five seconds, repeat the procedure.
Posted on Sep 07, 2009
Turns out this is a common problem for the Rendezvous.
I took it to a mechanic and after he tested to see if all the speed sensors were working with his handheld computer reader, (because there is no speedometer cable anymore) He reset the needle by turning the key about 25 times as far as possible without starting the vehicle. The speedometer needle came back a bit each key turn till it reached zero. It's been working fine since.
Posted on Dec 11, 2009
SOURCE: The speedometer on my 2004
It could be a bad connection in the wires between the speed sensor and the Engine Control Module (ECM). Is the ECM setting a speed sensor code? It could also be a bad Instrument Panel Cluster (IPC) module. Are there any codes in the IPC? It could be a problem with the data line between the ECM and the IPC, in which case you will be getting "U-codes" out of your ECM. (U-codes indicate communication problems between the various modules in your car) A good scan of you vehicle's computer systems would be the best place to start.
Posted on Dec 16, 2010
Tips for a great answer:
Mar 31, 2017 | 2004 Buick Rendezvous
Mar 14, 2013 | 2004 Buick Rendezvous
Aug 17, 2010 | 2004 Buick Rendezvous
Nov 11, 2009 | Buick Rendezvous Cars & Trucks
Oct 25, 2009 | 2004 Buick Rendezvous
Feb 14, 2009 | 2004 Buick Rendezvous
Jan 12, 2009 | 2004 Buick Rendezvous
Nov 04, 2008 | 2003 Buick Rendezvous
37 people viewed this question
Usually answered in minutes!