Question about Daewoo Tacuma

Open Question

How to fix daewoo tacuma 1.6 alternator belt - Tacuma Daewoo Cars & Trucks

Posted by Anonymous on

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

stevenhurc
  • 450 Answers

SOURCE: need to change rear brake bulb on daewoo tacuma

open rear hatch and remove 3 screws down edge of lamp assembly gently pull assembly out and then you can remove globe sockets from lamp assembly to change globe

Posted on Jun 24, 2009

  • 84 Answers

SOURCE: Daewoo Tacuma 2ltr petrol 2002

chance are you have a pinched wire in the door jam and when you shut the door its grounding out...

Posted on Apr 29, 2010

  • 1 Answer

SOURCE: oil leak/tacuma auto 2001

Hi,
I have a Daewoo Tacuma wagon 2001 and the Engine is noisy when acclerate .
Please advise.
Many Thanks

cheers,

Arnold

Posted on Jul 31, 2010

  • 177 Answers

SOURCE: where is the air flow meter on a tacuma

It is found in NEARSIDE ENGINE MOUNTING..






Car Performance Parts

Posted on Aug 01, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Daewoo Tacuma electric window on front passenger will not go up from driver's door control. Works OK from passenger door.


then the Switch is Probably the Problem. But You Need to check the Wires AT the Door since they are bending all the time and they will Break Useally in the Harness between the Door and the Car body

Sep 05, 2013 | 2001 Daewoo Tacuma 1.8

1 Answer

Check light comes on on daewoo tacuma when hot but egine still runs well


Also check manifold pressure sensor, mass air flow sensor and temperature sensors.

Oct 28, 2012 | Daewoo Cars & Trucks

1 Answer

Valve timmingsetting on dawoo tacuma 2.0l


Daewoo tacuma wont hold on rev making tank noise

Jan 23, 2011 | 2000 Daewoo Leganza

1 Answer

Daewoo Tacuma 2ltr petrol 2002


chance are you have a pinched wire in the door jam and when you shut the door its grounding out...

Apr 29, 2010 | 2002 Daewoo Lanos

2 Answers

Oil leak/tacuma auto 2001


put it up in the air and have a good look around ,most likely is a connection ??

Jul 30, 2009 | 2001 Daewoo Lanos

1 Answer

Need to change rear brake bulb on daewoo TACUMA CDX 2004 model but can not get to bulb any ideas please on how to change it


open rear hatch and remove 3 screws down edge of lamp assembly gently pull assembly out and then you can remove globe sockets from lamp assembly to change globe

Jun 24, 2009 | Daewoo Korando Cars & Trucks

1 Answer

Daewoo tacuma engine revs up when sitting stationary


Hi I am Vortash my first advice to you is change your garage to just give up on a customer is a disgrace , maybe you should find it difficult to pay their bill and see how they like it .
This sounds to me like you have an air leak at either the inlet manifold or in the Brake servo chamber , the fumes I am assuming are fuel based ? and not exhaust fumes it could also be one of the sensors on the maifold giving the ECu the incorrect information , or it may even be a faulty crank or cam sensor .. hope this helps regards Vortash

Jun 07, 2009 | 2000 Daewoo Korando

1 Answer

Thermostat


in the fron of the cylinder head ,you will need to remove the timing belt to get at it

Jan 11, 2009 | 2000 Daewoo Nubira

6 Answers

Daewoo tacuma engine management light


There is sooo many problems with the 1.8ltr engine (2001) ..for example the oil ports in the cylinder head casting are way too small.. this causes clogging and obvious lack of flow and then lack of power due to compression ratio going out the window.. I've re-built quite a wee number of these puppies.. including my wife's own car..so I heartily recommend the below..
1/ THOROUGHLY FLUSH EVERY LAST BIT OF GRIME, DEBRIS, LACQUERS & OIL OUT OF ENTIRE ENGINE..
2/CHANGE FILTER & REFILL WITH SEMI-SYNTHETIC 15/40 OIL..
3/ OIL AND FILTERS MUST BE CHANGED EVERY 3,000 TO 6,000MILES TO MAINTAIN ENGINE (IF NOT BORING OIL PORTS AND QUITE SUBSTANTIAL WORK & EXPENSE)

This should give immediate effect, but you may also consider the CRANK/FLYWHEEL SENSOR.. It's NOTORIOUS.. Along with the IGNITION COIL PACK.. CONSTANTLY CRACKING HIGH TENSION LEADS..Etc...
Hope this helps someone out there..

Jun 04, 2008 | 2000 Daewoo Leganza

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

yadayada
yadayada

Level 3 Expert

75005 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...