Question about Cars & Trucks

Open Question

Do you have Body express rock Roll stepper instructions manual

Tony Little Designs

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Power window won't roll up on auto


If window will not roll up it can be caused by a problem with the mechanism, no power getting to motor, bad switch, bad motor, fuse issue.

Feb 28, 2016 | Cars & Trucks

1 Answer

A manual for my hers MS -93


Impex Home Gym MS-60 User Guide ' ManualsOnline.com

fitness.manualsonline.com > ... > Impex Home Gym
Impex MS-60 Home Gym User Manual. Page 1 ... Assembly Instruction. Parts List ... 12-28-05. OWNER'S. MANUAL. Hers. MINI STEPPER. MS-60. IMPEX INC.

[PDF]MINI STEPPER

www.fitnessequipmentexpress.com/images/pdf/IPX017.pdf
Assembly Instruction. Parts List. Warranty. Ordering Parts. Model. MS-71. Retain This.Manual for. Reference. 100624. OWNER'S. MANUAL. HERS.

Nov 28, 2015 | Cars & Trucks

1 Answer

NO PROBLEM STARTING, BUT IDLING IS INCONSISTENT, DRIVES LIKE A DREAM, ONLY WHEN ON IDLE JUMPS FROM 1000 R/M TO 3000 R/M AND SO ON


The stepper motor responsible for idle air control seems to be be faulty.
Depending on make/model you may need to change either the stepper motor or the throttle body.
Cleaning the idle air valve controlled by the stepper motor can sometimes solve the problem but usually not.

Nov 27, 2015 | Cars & Trucks

1 Answer

How do I find the stepper motor on a 2003 Buick Rendezvous?


On the Throttle Body

Doubt it failed

Best make sure you have no cylinder misfires
& are not loosing throttle plate data or tps data

DO NOT replace parts
Have a professional road test with scan tool, to look at data

You need to do every thing to learn the vehicles systems
& find a problem & avoid replacing the throttle body, due to
lack of knowledge

Get some CRC Throttle Body Cleaner & read the
back of can

Aug 12, 2014 | 2003 Buick Rendezvous

2 Answers

How do I find where the stepper motor is located on a 2004 trailblazer


Here's a step by step. http://forums.trailvoy.com/showthread.php?t=48886

Jul 05, 2014 | 2004 Chevrolet TrailBlazer

1 Answer

How to clean throttle body on 2002 chevy trail blazer. Step by step instructions if possible. Thanks so much


Instructions for doing it without removing the throttle body.

1. Disonnect the battery....very important so your stepper motor isn't ruined when moving the butterfly.
2. Remove the plastic resonator on the top of the engine (The black piece that says 4200 on it)
3. Remove the large rubber hose from the throttle body.
4. Clean away, with throttle body cleaner or Seafoam, I just use the blue shop towels to clean in there. Could use a plastic bristle brush also for more elbow grease. Be very careful, as the butterfly will cut you very easily, very sharp edges. Make sure you get all the gunk out of there, including any edges of gunk that may have formed, preventing the butterfly from opening and closing properly. Needs to be nice and shiny.
5. Hook the resonator and hoses back up, don't forget the little pcv hose on the front right corner of it.
6. Hook the battery back up and drive around for 20 minutes or so with all accesories OFF. The computer will relearn a properly functioning throttle body at that point.
7. Enjoy a little bettery gas mileage and horsepower.

Feb 21, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

I went to a local repair shop because my check engine light is on. I have a 06 Chevy Trailblazer. The codes were P1400 and P0506. They recommended a fuel injection cleaning and clean the throttle body...


Definitely clean that throttle body...can do it yourself for around $7.

Instructions for doing it without removing the throttle body.

1. Disonnect the battery....very important so your stepper motor isn't ruined when moving the butterfly.
2. Remove the plastic resonator on the top of the engine (The black piece that says 4200 on it)
3. Remove the large rubber hose from the throttle body.
4. Clean away, with throttle body cleaner or Seafoam, I just use the blue shop towels to clean in there. Could use a plastic bristle brush also for more elbow grease. Be very careful, as the butterfly will cut you very easily, very sharp edges. Make sure you get all the gunk out of there, including any edges of gunk that may have formed, preventing the butterfly from opening and closing properly. Needs to be nice and shiny.
5. Hook the resonator and hoses back up, don't forget the little pcv hose on the front right corner of it.
6. Hook the battery back up and drive around for 20 minutes or so with all accesories OFF. The computer will relearn a properly functioning throttle body at that point.
7. Enjoy a little bettery gas mileage and horsepower


As far as the injector cleane....Buy a $10 can of Seafoam, that will clean the injectors. Look on Youtube on how it works, good stuff.

Feb 14, 2011 | 2006 Chevrolet Trailblazer Ext

1 Answer

My service engine light is on. and I took it too autozone to be checked and got the results: Large vacuum leak on engine, 2. throttle body condition-dirty and faulty IAC valve/throttle. what does this...


These are all things that can affect your gas mileage and engine performance.

To check for vacuum leak, look for unhooked hoses on top of engine. If OK, use starter fluid and spray along intake manifold gaskets with engine running. If engine speeds up, there is a leaking gasket.

IAC deals with idle. Does the car idle smoothly? If not, remove IAC to see if it's dirty. I will paste instructions below for the IAC valve.

Throttle body dirty--what code is this? never heard of such a code, but you can clean the throttle body wioth carb cleaner. I will paste instructions below.

IAC valve info:


Operation The amount of air taken in during idling is regulated by the opening and closing of the servo valve located in the air passage that bypasses the throttle valve. The servo valve is opened or closed by the activation of the stepper motor (incorporated within the idle air control motor in the forward or reverse direction. Battery positive voltage is supplied, by way of the MFI relay, to the coil of the stepper motor. The engine control module switches ON the power transistors (located within the engine control module) in sequential order, and, when current flows to the stepper motor coil, the stepper motor is activated in the forward or reverse direction.


Removal & Installation

  1. Disconnect the negative battery cable.
  2. Detach the electrical connector at the sensor.
  3. Remove the sensor from the throttle body.
To install:
  1. Install the sensor in the opening in the throttle body and tighten the sensor.
  2. Attach the electrical connector to the sensor.
  3. Connect the negative battery cable.


Testing
Checking Coil Resistance

  1. Disconnect the idle air control motor connector and connect the jumper (test harness).
  2. Measure the resistance between terminal (2) of the connector at the idle air control motor side and terminal (1) or terminal (3). Standard value: 28-33 ohms at 68°F
  3. Measure the resistance between terminal (5) of the connector at the idle air control motor side and terminal (6) or terminal (4). Standard value: 28-33 ohms at 68°F
  4. If not within specifications, replace the IAC Valve.
  5. If within specifications, check connectors and wiring between the sensor and ECM/PCM.
Checking Operation Sound
  1. Check that the operating sound of the stepper motor can be heard over the idle air control motor when the ignition switch is turned to the ON position (without starting the engine).
  2. If no operating sound can be heard, check the stepper motor drive circuit. (If the circuit is good, a defective stepper motor or engine control module is suspected.)

      0029f4e.gif
    IAC picture--mounted on top side of engine.
      Throttle body--loosten clamp to right of throttle body and pull hose off. Use electric parts cleaner or carb cleaner--spray on dirt with engine running. don't touch any sensors inside throttle body--sensors are delicate.
    b9362af.gif

    Oct 11, 2010 | 2005 Mitsubishi Endeavor

    2 Answers

    My 2001 Hyundai Accent has really bad body roll, is there an easy way that this can be fixed??


    front strut bar. Its an aftermarket piece that "ties" the strut towers together and tightens the chassis thus improving handling and body roll.
    only downfall.. most aftermarket stuts are a little pricey and they may come into contact with your hood slightly.

    Nov 01, 2008 | 2002 Hyundai Accent

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    84 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    76132 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...