Question about Cars & Trucks

Open Question

My rover 25 2005 it doesn't blow out hot air from

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 651 Answers

SOURCE: heater blowing cold air

squeeze the hoses to get any air bubbles out and refill coolant as necesary. are you sure you put thermostat in the right way? may be backwards. also may be your sensor.

Posted on Jan 04, 2009

  • 115 Answers

SOURCE: heater not blowing hot air

sounds like a blend door problem... find lever to blend door disconnect it move lever back and forth and see if it changes anything...

Posted on Aug 01, 2009

  • 8 Answers

SOURCE: heater blows cold air, replaced thermostat &

try to back flush the heater core. and if that dont work check the blend door it see if it is working.

Posted on Oct 15, 2009

  • 14036 Answers

SOURCE: heater will not blow out hot air. System has been

did you change thermostat.

Posted on Jan 02, 2010

  • 2 Answers

SOURCE: heater blows cold air. I have replaced thermostat,

Not an expert by any means, but i know my ranger.. I had a small leak at the top of my radiator that still cooled the engine but didnt have enough pressure to get to the heater. The heater hoses travel up over the engine and just were not gettin anything to my heater core. That or make sure the heater control valve is operating.

Posted on Apr 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My land rover is always threatening to overheat had pressure test done they did the test for blown head gasket it blows cold air I changed thermostat there are no leaks anywhere please help 2002 land rover...


What blows cold air? The heater? Sounds like a radiator problem. I'd have someone flush the cooling system if it has not already been done. Could also be a bad or going bad Coolant pump, unless it has been replaced. It might be smart to do both at the same time. If the coolant pump is bad, it could explain no circulation of hot coolant through your heater coil.

Mar 04, 2015 | Land Rover Cars & Trucks

2 Answers

Heater doesn't get hot on 96 chevy truck. Blows good, just cold. Replaced thermostat, flushed radiator. Any ideas?


Air Temperature Control Blend Door Failure No Heat or no AC (dependes on where door sticks)

In all modern cars there is a tiny DC electric motor driven gear drive that moves a plastic door that blends heated and cooled air from the AC and the heater core, this is called (interestedly enough) the air temperature control blend door actuator. The motor that moves this door fails because the door starts sticking from warping, most common complaint is no heat but it can be no AC as well. To replace these parts (blend door and blend door actuator) you must remove the entire dash from the car. Always have this problem confirmed by a dealer or qualified repair shop as it is a very expensive repair.

Other causes of no heat in the cabin are engine thermostats that are stuck open (engine runs cold) or air bubbles in the cooling system.

Dec 06, 2012 | Cars & Trucks

2 Answers

Car wont blow hot air


Does it blow any air at all?

If it does, then check the operation of the valve, situated on the side of the heater matrix.
The heater matrix is in the centre of the vehicle, under the dash. Roughly behind where most car stereos are situated.
You'll have to remove any black, plastic shrouds to get to it.
Work the hot/cold setting and check the valve for movement.
If it is a motor actuated valve and in the even the valve doesn't move, then also check power to the motor.
If you have no power to the motor, or if the cable operated valve isn't moving then check the switch mechanism or wire/wiring.

Nov 12, 2012 | 2000 Mercury Cougar

2 Answers

Why would my heater blow out cool air when sitting still and then hot air when going down the road and then it's not all that hot


Try flushing or blowing high pressure air through the heater core lines. its sludge build up and need to be flushed through heater core only. check antifreeze fluid level. only put in straight antifreeze, do not mix. most people do not know what mixture should be, so be safe and add straight, it will not hurt it, i run 100% straight antifreeze and never had a problem or worry about it ever freezing and cracking my block, heads or radiator cracking.

Jan 29, 2012 | 2001 Daewoo Nubira

1 Answer

Heater core is working properly but car will not blow hot air only cold air i am thinking the flapper that controls hot \ cold is stuck in the cold air position


To troubleshoot this types of problem,click the link below :----http://howtobyme.blogspot.in/2012/02/heater-blows-only-from-defrost.html
--------Go through the procedure to confirm the issue.

------
Engine Overheats and heater blowing cold?

http://howtobyme.blogspot.com/2011/11/engine-overheats-and-heater-blowing.html

---------
Heat blows cold on drivers side and hot on passenger side?

http://schematicsdiagram.blogspot.com/2011/12/heat-blows-cold-on-drivers-side-and-hot.html

-----------


This will help.Thanks.

Jan 25, 2012 | 2001 Buick LeSabre

1 Answer

When your heater blows cold air


flush the cooling system, probably clogged. happened to me a bit ago with a 99 cherrokee. hope it helps ya.

Dec 18, 2011 | 1999 Ford Taurus

1 Answer

Heater blowing cold air replaced thermastat next day heater blowed hot then it started blowing cold again has a new radiator and the water is not low


Flush coolant system out first with prestone or peak coolant flush if problem still exist replace heater core.

Apr 05, 2011 | 2001 Chevrolet Blazer

2 Answers

Heater blows cold air, replaced thermostat &


try to back flush the heater core. and if that dont work check the blend door it see if it is working.

Oct 15, 2009 | 2002 Mitsubishi Galant

1 Answer

Heater blows hot air on driver side but cold on Passanger side ?


either the heater rad is chocked up and its not hot all over,or its a flap opening problem

Jun 26, 2009 | 1999 Land Rover Range Rover

1 Answer

Heater output goes from hot to cold


It sounds like you have a blocked heater core ( Small radiator that the interior fan blows through to create the heat inside the car), If you can get access to the heater core pipes you might be able to flush it out but usually they need replacing.
hope this help

Jan 15, 2009 | 1997 Land Rover Range Rover

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...