Question about 1996 Dodge Caravan

1 Answer

Wont start put coil pack on and a crank sencer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 51 Answers

Do you have feul psi

Posted on Oct 25, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: wont start

I know this may sound simple and dumb, but have you checked your ground wire?

Posted on Jun 19, 2008

  • 422 Answers

SOURCE: car wont start

fuel pump relay or ignition relay

Posted on Aug 26, 2008

fischmilch
  • 96 Answers

SOURCE: 1994 dodge interpid wont start have no power going

The crank sensor shouldn't have any effect on the coil pack. Check the ignition module

Posted on Aug 21, 2009

csmock132
  • 4669 Answers

SOURCE: 1997 dodge caravan has no spark has new coil tryed

What engine?

Posted on Apr 03, 2010

johnjnail
  • 1702 Answers

SOURCE: I have a 2001 Dodge

are you getting fuel pressure, i know you replaced the pump but is the new pump ruining? and if the the pump is ruining is there any fuel pressure? if there is fuel pressure is there any injector pules? you check this by unplugging a fuel injector and installing a noid light in the plug in and crank the engine over the light should flash ( if you don't have a noid light you can make one from a 12 volt test light or a tail light bulb and plug ) after you check these things get back with me and we will see if we can get this thing ruining again.

Posted on Mar 12, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car wont start


In the circuit between the crank position sensor and the coil packs, is the ignition control module. It not only amplifies the crank position signal, but also does things like set the ignition advance curve as rpm goes up. It is expensive, but could be bad. First check to see it it is getting power, and it is not a fuse or a relay before trying that unit.

Jan 11, 2016 | 2000 Buick Park Avenue

1 Answer

Hello i have a 2001 dodge caravan and it will just not start ,but it will turn over do know sparks ? we change the crank sencer ,and other sencers and still know sparks ? please help me somebody told me it...


Hi, are you getting power to the coil? Use a voltmeter set to DC, turn the key on, and measure the voltage at the brown coil pack wire as compared to chassis ground. It should be 12 volts. If not, pull out the ASD relay in the power box and probe the socket. This time put one probe to battery positive and use the other probe to check the relay socket terminals. One of the terminals should yield 12 volts when the key is on. If not, the PCM is not turning the relay on--possibly due to security system.
If you have power to the coil pack, change your meter to AC volts and check voltage across the coil while someone cranks the engine. First check AC volts from the brown to one of the dark blue wires, and the from the brown to the other dark blue wire.
Please let me know the outcome of these tests for a diagnosis.

jturcotte_1467.gifjturcotte_1468.gif

Apr 13, 2011 | 2001 Dodge Caravan

2 Answers

Hard to start


1- Check your Battery. 2- Check your Fuel filter

Jan 19, 2011 | 1999 Pontiac Sunfire

2 Answers

96 intrepid not fireing have tried resetting the timeing no codes were found new coil pack all connections r good what do i do next


i got a1996 dodge intrepid 3.5 L .the spark plugs 1,3,2 works but 4,5,6 do not work. i changed the spark plug wires, the coil ,the crankshaft sencer and the camshaft sencer.what else could cause this not to start?

Jan 19, 2010 | 1996 Dodge Intrepid

1 Answer

CAR WONT CRANKS BUT WONT START


There is an easy way to determine wether your getting spark or not. Take a plug wire off a spark plug and put it next to a solid piece of metal like a bracket (somewhere you can see the end of the wire sparking) hold the wire behind the connection point, and crank the engine (have someone help). If you see a spark, you are getting spark to the plugs, but may still have a problem with the coil pack. There is only one way to find out. Take the coil pack off, and look at it. There are two types of coil packs - 1 piece and three piece (others may be possible) on a three piece, you will need to have each one tested to determine whether it's bad or not. On a one piece, pull it off and look at the glue like material underneath it, that part is called the modular (the coil pack(s) will screw down to it. The modular may be bad, and may be able to test it as well.

Apr 01, 2009 | 2000 Mitsubishi Eclipse

2 Answers

Replaced clutch. then went to start no spark. checked with many test with distributer and the throtal position sencer. checked signal from the sencer to the ecm and we go the sqaure wave pattren. but the...


Make sure you did not get any wires pinched between engine & bellhousing this is common.If it started and ran before doing clutch, nothing you did should change that! Are all wires back on starter motor?

Feb 26, 2009 | 1997 GMC Savana

1 Answer

Crank shaft timing sencer


if its a zetec engine its probably a coil pack gone down,but you dont say if its petrol or diesel,if it was a cranksensor failure it wouldnt start at all...

Dec 30, 2008 | 2005 Ford Focus

2 Answers

93 buick regal grand sport


no the crank shaft sensor would not stop it from turning over

Oct 17, 2017 | 1994 Buick LeSabre

Not finding what you are looking for?
1996 Dodge Caravan Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...