Question about 2003 Cadillac Deville
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Sounds like a Blend door issue, but could be the controller switch, Test ALL modes of operation to see what works and what does not. That should narrow it down a bit. The Blend doors are flap/ doors that regulate air flow, newer vehicles are plastic - electric assemblies ...prone to failure. Any clicking or thumping noises during switching modes and on-off suggest a bad Blend door. Hope that helps...good luck
Posted on Jan 12, 2009
The heater in your car depends upon a flow of hot coolant going through the heater core in order to get hot air into the car. If the heater core is partially plugged, it will restrict the flow. If you have a head gasket that is putting exhaust into the cooling system, it will eventually get into the heater core. When this happens there is no coolant in the heater core to make the air warm. If the water pump vanes have corroded away the result will be very poor coolant circulation causing the heater to not blow hot air. If your car is equipped with a heater control valve that is not functioning properly, the coolant flow will be restricted. One or a combination of these factors is likely the culprit in your case.
Thank you for using FixYa! A FiXyA rating is appreciated!!
Posted on Jan 22, 2009
Tips for a great answer:
Feb 10, 2011 | 2004 Cadillac Deville
Apr 14, 2010 | 2003 Cadillac Deville
Aug 29, 2009 | 2003 Cadillac Deville
Jul 23, 2009 | 2003 Cadillac Deville
Jun 18, 2009 | 2002 Cadillac Deville
Jun 16, 2009 | 1999 Cadillac DeVille
Jun 15, 2009 | 1999 Cadillac DeVille
Jun 04, 2009 | 2003 Cadillac Deville
81 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: