Question about 2000 Lincoln Town Car
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I know this is an old blog but some people may still find it helpful. There are 4 wires in the roof window switch hooked up to 2 smaller harnesses that have 2 wires each.
Remove the switch and use only the metal contacts in the harnesses. One should use a light tester to confirm which one is the ground and live. this is how it turned out for my car.
One harness has a light blue wire with a black stripe, and a black wire. the blue one is live, the black one is ground.
The other harness has a red wire and a darker blue wire (silly ford) these are the motor connect and return wires.
You must hook up thhooked to (example, if the live wire was connected to blue motor wire and the ground wire was connected to red motor wire and it opened it, that would mean you would want to put the live wire to the red motor wire and the ground wire to the blue motor wire)
When doing these wire connections, it is advised that you have the ignition turned off. Once you make all the connections properly, you can turn on the ignition and if done correctly, the roof window will move. Once it is closed, remove the wires frome the harnesses and LEAVE THE ROOF WINDOW ALONE UNTIL YOU HAVE A NEW SWITCH.
e power (Live, light blue) wire to a motor wire. You must then run another wire from the other motor wire. To complete this circuit there is only one place that this last wire can go and it is to the ground. once this is connected the roof should either open more or close.
To reverse the operation of the roof, simply reverse the position of the live and ground wires in respect to which motor wires they are
Posted on Apr 12, 2009
SOURCE: sunroof won't close
Hey Paul, there are limit switches integrated into the motor on your sunroof, usually if it stops completely its because it detected a restriction, such as leaves, or dirt, if there are no visual sign then with the key on hold the switch to the full open position for 10-12 sec then hold it in the close position for the same, cycle the key and see if it reset. The motor can fail as well but it's not very common.. Do u hear any clicking from the motor area when this occurs, also check all fuses to be safe as well,..
Posted on Jun 10, 2012
Tips for a great answer:
May 10, 2013 | Cars & Trucks
Apr 15, 2013 | 2000 Audi A6
Feb 01, 2013 | 1999 Chevrolet Tahoe
Oct 20, 2012 | 2001 Oldsmobile Alero
Sep 25, 2012 | 2003 Toyota Corolla
Jul 15, 2012 | Cars & Trucks
Jun 09, 2012 | 2006 Lincoln Mark LT
Jun 05, 2012 | Chevrolet Cavalier Cars & Trucks
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: